Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Mastercam 2020 Multiaxis Essentials eCourse

Buy Now
149.00 995.00

The Mastercam 2020 Multiaxis Essentials eCourse is intended for the advanced Mastercam user looking to learn Mastercam Multiaxis programming. A firm grasp on both 2D and 3D machining is required and can be attained by completing the Mill Essentials and Mill Advanced Training Tutorials or eCourses.


The Multiaxis Essentials eCourse covers the different applications that are available by configuring the Rotary Axis Control page including: Rotary axis positioning and Axis substitution. It also covers the Multiaxis Classic family toolpaths: Rotary, Curve, Swarf, Flow, and Msurf. A special tutorial is dedicated to teaching how to drill and circle mill holes using Multiaxis toolpaths. Specific parameters such as Cut patterns, Tool Axis Control, Limits, Collision Control, Linking and more are described in detail.

The contents also describe how to verify the toolpaths using the new Machine Simulation module that combines toolpath backplot mode and material removal mode with collision detections.


Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 10 hours to complete.

Introduction
  1. Mastercam 2020 Getting Started
    15:52
Tutorial 1
  1. Tutorial 1 covers Contour With Axis Substitution.

  2. 1. Intro
    0:53
  3. 2. Create the Geometry for the Cylindrical Helix
    2:49
  4. 3. Machine Definition and Stock Setup
    1:07
  5. 4. Machine the Cylindrical Helix Using Contour with Axis Substitution
    4:58
  6. 5. Machine the Conical Helix Using Contour with Axis Substitution
    4:09
Tutorial 2
  1. Tutorial 2 covers Drilling With Axis Substitution and Rotary Axis Positioning & Transform Rotate toolapths.

  2. 1. Intro, Open Geometry, Select Machine Definition, Setup Stock
    1:43
  3. 2. Drill the Four 3/8" Holes using Axis Substitution
    2:60
  4. 3. Drill the Eight Holes using Axis Substitution
    2:29
  5. 4. Engrave the Numbers using Contour with Axis Substitution
    3:30
  6. 5. Contour the Top Slot
    2:47
  7. 6. Toolpath Transform Rotate to Finish the Part
    2:11
Tutorial 3
  1. Tutorial 3 covers Contour Indexing Using Planes.

  2. 1. Intro, Open Geometry, Select Machine Definition, and Setup Stock
    2:29
  3. 2. Machine the Cutouts using Contour with Axis Substitution
    5:11
  4. 3. Drill One Hole in a New Tool Plane
    3:22
  5. 4. Toolpath Transform to Drill the Remaining Holes
    2:20
  6. 5. Machine the Top Slot using Contour
    2:22
  7. 6. Machine the Large Slot in a New Tool Plane Using Contour
    2:54
Tutorial 4
  1. Tutorial 5 covers Rotary 4-Axis.

  2. 1. Intro, Open the Geometry, Select Machine Definition, Stock Setup
    1:55
  3. 2. Machine the Cams Using Rotary with the Rotary Cut Method
    6:19
  4. 3. Machine the Cams using Rotary with the Axial Cut Method
    5:09
Tutorial 5
  1. Tutorial 5 covers Curve 5-Axis.

  2. 1. Intro, Open Geometry, Select a Machine Definition, Setup Stock
    2:20
  3. 2. Curve 5 Axis with Tool Axis Control To Point
    4:21
  4. 3. Curve 5 Axis with Tool Axis Control From Point
    3:35
  5. 4. Curve 5 Axis with Tool Axis Control to Plane
    2:37
  6. 5. Curve 5 Axis with Tool Axis Control to Chain
    2:17
  7. 6. Curve 5 Axis with Tool Axis Control to Lines
    3:06
Tutorial 6
  1. Tutorial 6 covers Swarf 5-Axis.

  2. 1. Intro, Open Geometry, Create Stock Model
    3:27
  3. 2. Swarf 5 Axis with Walls Defined from Chains
    5:23
  4. 3. Swarf 5 Axis with Walls Defined from Surfaces
    2:10
Tutorial 7
  1. Tutorial 7 covers Drill & Circle Mill 5-Axis.

  2. 1. Intro, Open Geometry, Create Hole Axes
    2:50
  3. 2. Spot Drill and Drill the Half Inch Holes
    4:12
  4. 3. Circle Mill the Large Holes
    3:28
Tutorial 8
  1. Tutorial 8 covers Flow 5-Axis.

  2. 1. Intro, Open Geometry, Select Machine Definition
    1:27
  3. 2. Flow 5 Axis Parallel To a Line
    7:14
  4. 3. Flow 5 Axis to a Point
    5:14
  5. 4. Toolpath Transform Rotate to Finish the Blades
    1:52
Tutorial 9
  1. Tutorial 9 covers Multisurface 5-Axis.

  2. 1. Intro, Open Geometry, Machine Definition and Stock Setup
    1:38
  3. 2. Multisurface to Rough the Cavity
    5:15
  4. 3. Machine Simulation
    1:27
  5. 4. Finish the Part using Multisurface 5 Axis
    4:29
Tutorial 10
  1. Tutorial 10 covers the Deburr toolpath

  2. 1. Intro, Open Geometry, Select Machine Definition and Stock Setup
    1:39
  3. 2. 3 Axis Deburr the Top Edge and Hole
    4:21
  4. 3. 3+2 Axis Deburr the Inside Hole
    2:10
  5. 4. 5 Axis Deburr Toolpath
    1:47

Write a review


Guest


Inder Jandu

  • 4
   1 of 1 member found this review helpful 1 / 1 member

Please elaborate more. Most of the steps are vague, if you are doing certain operation in multiaxis, please describe why and what if.   Otherwise the training is good but have to google few answer. 

Share this review


Link to review

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...