Mastercam 2021 Mill Advanced eCourse

Buy Now

149.00 995.00

This eCourse is designed to provide the resources you need to become proficient with 3D geometry creation and toolpaths. If you are new to Mastercam, it is highly recommended that you start with Mill Essentials (book or eCourse) to build a firm foundation of 2D knowledge prior to exploring 3D.

Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 15 hours to complete.

All videos in this eCourse are Closed Captions

Introduction

Mastercam 2021 Getting Started Video

10:06

Tutorial 1

Tutorial 1 covers Surface High Speed Area Roughing, Surface High Speed Horizontal, Surface High Speed Waterline toolpaths.
1. Intro

0:53
2. Solid Creation

5:22
3. Machine Definition and Stock Setup

0:45
4. Rough Using Area Mill

6:23
5. Machine the Flat Area

3:46
6. Finish the Walls

3:13

Tutorial 2

Tutorial 2 covers Stock Model, Surface High Speed Area Roughing with Rest Material, Surface High Speed Radial, Surface Finish Blend, and Tool Transform Rotate.
1. Intro

1:15
2. Geometry Creation

5:44
3. Stock Model

1:36
4. Rough

4:57
5. Stock Model #2

0:40
6. Finish with Radial

3:07
7. Blend

4:60
8. Toolpath Transform Rotate

1:32

Tutorial 3

Tutorial 3 covers Surface High Speed Dynamic Optirough, Surface High Speed Dynamic Optirough with Rest Material, Stock Model, and Surface High Speed Scallop.
1. Intro and Open Geometry

2:04
2. Create Additional Geometry

10:43
3. Stock Setup

1:26
4. OptiRough

5:28
5. OptiRough with Rest Material

5:38
6. Scallop

5:48

Tutorial 4

Tutorial 4 covers Surface High Speed Area Roughing, Stock Model, Surface High Speed Scallop, Toolpath Transform Rotate, Surface High Speed Spiral, and Surface High Speed Waterline.
1. Intro

1:08
2. Geometry Creation

25:49
3. Machine Definition and Stock Setup

0:59
4. Rough the Part and Stock Model

3:54
5. Finish the Top Using Spiral

5:11
6. Finish the Walls using Waterline

2:33
7. Scallop One Pocket

5:06
8. Toolpath Transform Rotate

2:30

Tutorial 5

Tutorial 5 covers Solid Extrude Create Body, Extrude Boss, Extrude Cut, Draft to Face, Constant Radius Fillet, Shell, 2D High Speed Dynamic Mill, Surface High Speed Dynamic OptiRough, Surface High Speed Hybrid, Surface High Speed Pencil, 2D High Speed Dynamic Contour.
1. Intro

1:60
2. Create the Solid Model

15:22
3. Create the Core

8:04
4. Stock Setup

0:57
5. Rough Using Dynamic

2:23
6. Rough the Core Using OptiRough

2:34
7. Hybrid

2:60
8. Pencil

2:20
9. Dynamic Contour

3:09

Tutorial 6

Tutorial 6 covers Surface commands such as Net, Loft, and Flat Boundary. Toolpaths such as 2D High Speed Dynamic OptiRough, Surface High Speed Scallop, Surface High Speed Pencil, Surface High Speed Project will be used.
1. Intro

1:35
2. Create Surfaces

5:24
3. Machine Definition and Stock Setup

0:47
4. Rough Using Dynamic Mill

3:50
5. OptiRough the Boss

2:27
6. Finish Using Scallop

2:11
7. Pencil

2:10
8. Project

3:19

Exercises

Exercises

NOTE: These exercises were recorded for Mastercam 2020 but still apply to Mastercam 2021.
2 Surface Blend

0:52
3 Surface Blend

0:50
3 Fillet Blend

3:26
Create Curves

1:10
Cube

2:54
Draft and Flat Boundary Surfaces

1:10
Dynamic Planes

3:11
Fence Surface

1:36
Net Surface 1

1:55
Net Surface 2

0:31
Net Surface 3

0:31
Plane by Entity

1:31
Plane by Normal

1:34
Primitives

2:18
Revolved Surface

0:46
Surface Fillet

2:19
Sweep Surface

0:41
Trim to Curves

1:58

Write a review

Your name
Security Check
Rating Required

1 2 3 4 5
Comment Required
Click here

× Pasted as rich text.   Paste as plain text instead

Only 75 emoji are allowed.

× Your link has been automatically embedded.   Display as a link instead

× Your previous content has been restored.   Clear editor

× You cannot paste images directly. Upload or insert images from URL.

Insert image from URL
×

Desktop

Tablet

Phone

harold1121 0

December 27, 2020

2 of 2 members found this review helpful 2 / 2 members

Excellent Course a bit short but still well covered on 3D Design and Machining !!!

Share this review

Link to review

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.