Good course and well explained I just think a multi axis course needs to be must more in Depth, but well done I have certainly learned allot from this Course !!!
Mastercam 2021 Multiaxis Essentials eCourse
-
-
-
-
-
Buy Now
149.00
995.00
The Mastercam 2021 Multiaxis Essentials eCourse is intended for the advanced Mastercam user looking to learn Mastercam Multiaxis programming. A firm grasp on both 2D and 3D machining is required and can be attained by completing the Mill Essentials and Mill Advanced Training Tutorials or eCourses.
The Multiaxis Essentials eCourse covers the different applications that are available by configuring the Rotary Axis Control page including: Rotary axis positioning and Axis substitution. It also covers the Multiaxis Classic family toolpaths: Rotary, Curve, Swarf, Flow, and Msurf. A special tutorial is dedicated to teaching how to drill and circle mill holes using Multiaxis toolpaths. Specific parameters such as Cut patterns, Tool Axis Control, Limits, Collision Control, Linking and more are described in detail.
The contents also describe how to verify the toolpaths using the new Machine Simulation module that combines toolpath backplot mode and material removal mode with collision detections.
Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 10 hours to complete.
Introduction
-
Mastercam 2021 Getting Started Video10:06
Tutorial 1
-
Tutorial 1 covers Contour With Axis Substitution.
-
1. Intro0:52
-
2. Geometry Creation2:15
-
3. Machine Definition and Stock Setup0:57
-
4. Contour the Cylindrical Helix with Axis Substitution4:44
-
5. Contour the Conical Helix with Axis Substitution4:05
Tutorial 2
-
Tutorial 2 covers Drilling With Axis Substitution and Rotary Axis Positioning & Transform Rotate toolapths.
-
1. Intro1:33
-
2. Machine Definition0:44
-
3. Drill 4 Holes with Axis Substitution2:37
-
4. Drill 8 Holes with Axis Substitution2:06
-
5. Engrave3:19
-
6. Contour the Top Slot2:30
-
7. Toolpath Transform Rotate2:10
Tutorial 3
-
Tutorial 3 covers 2D High Speed Dynamic Mill with Axis Substitution, Contour with Axis Substitution, Swarf Milling, Drill, New Planes, and Toolpath Transform Rotate
-
1. Intro1:32
-
2. Machine Definition0:54
-
3. Dynamic Mill4:47
-
4. Contour4:13
-
5. Swarf Mill4:50
-
6. Drill4:12
-
7. Machine One Slot3:44
-
8. Transform Rotate the Remaining Slots1:58
-
9. Machine the Flat Areas5:36
Tutorial 4
-
Tutorial 5 covers Rotary 4-Axis.
-
1. Intro1:60
-
2. Rotary with the Rotary Cut Method4:31
-
3. Rotary with the Axial Cut Method4:17
Tutorial 5
-
Tutorial 5 covers Curve 5-Axis.
-
1. Intro2:23
-
2. Curve 5 Axis to Point4:11
-
3. Curve 5 Axis from Point3:05
-
4. Curve 5 Axis by Plane2:48
-
5. Curve 5 Axis to Chain2:41
-
6. Curve 5 Axis to Lines4:12
Tutorial 6
-
Tutorial 6 covers Swarf 5-Axis.
-
1. Intro3:36
-
2. Swarf from Chains6:32
-
3. Swarf from Surfaces3:04
Tutorial 7
-
Tutorial 7 covers Circle Mill 5-Axis and Multiaxis Link
-
1. Intro2:30
-
2. Circle Mill Part 15:56
-
3. Circle Mill Part 22:50
-
4. Circle Mill Part 32:16
-
5. Multiaxis Link2:09
Tutorial 8
-
Tutorial 8 covers Flow 5-Axis.
-
1. Intro1:35
-
2. Flow 5 Axis Oriented to Lines7:08
-
3. flow 5 Axis Oriented to a Point5:17
-
4. Toolpath Transform Rotate1:57
Tutorial 9
-
Tutorial 9 covers Multisurface 5-Axis.
-
1. Intro1:54
-
2. Multisurface Along a Line6:41
-
3. Multisurface Within a Boundary4:28
Tutorial 10
-
Tutorial 10 covers the Deburr toolpath
-
1. Intro1:43
-
2. 3 Axis Deburr5:12
-
3. 3+2 Axis Deburr2:41
-
4. 5 Axis Deburr2:06
Write a review
I think this course is not included enough tutorial to learn a multiaxis programming. They could explain more how you create tool axis control Lines, Point, Plane, Chain etc... And just a few of 5 axis toolpaths pattern are covered.
Once you complete the Course, all tutorial videos are not available anymore.