Mastercam 2021 Lathe eCourse

Buy Now

149.00 995.00

This eCourse is designed to familiarize you with the Mastercam user interface and provide the resources you need to become proficient with geometry creation and toolpaths for lathe applications. If you are new to Mastercam, it will help you quickly develop your Mastercam skill set; if you are already using the software, it will get you up-to-date and enhance your abilities.

Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 7 hours to complete.

Introduction

Mastercam 2021 Getting Started Video

10:06

Tutorial 1

Tutorial 1 covers the Face, Roughing and Finish toolpaths.
1. Intro

0:47
2. Wireframe Creation

4:50
3. Machine Definition and Stock Setup

3:44
4. Face

3:59
5. Rough

4:50
6. Finish

2:56

Tutorial 2

Tutorial 2 covers Groove using Multiple Chains & Drilling toolpaths.
1. Intro

0:52
2. Wireframe Creation

5:42
3. Tool Settings and Stock Setup

2:03
4. Face

0:36
5. Rough the OD

1:45
6. Finish the OD

1:23
7. Groove Using Multiple Chains

4:03
8. Center Drill and Drill

3:02

Tutorial 3

Tutorial 3 covers Canned Rough & Finish toolpaths, Groove at an angle, as well as Custom Tool & Cutoff toolpaths.
1. Intro, Open File, Create Turn Profile

3:07
2. Machine Definition and Stock Setup

2:16
3. Face

0:35
4. Center Drill and Drill

1:55
5. Canned Rough the ID

3:32
6. Canned Finish the ID

1:32
7. Rough the OD

3:21
8. Finish the OD

1:22
9. Groove with a Vertical Tool

3:56
10. Groove with an Angled Tool

4:11
11. Cutoff

2:25

Tutorial 4

Tutorial 4 covers ID Rough, Finish & Groove toolpaths.
1. Intro

0:43
2. Geometry Creation

3:56
3. Tool Settings and Stock Setup

1:33
4. Face

0:30
5. Rough and Finish the OD

2:28
6. Center Drill and Drill

1:49
7. Rough and Finish the ID

2:35
8. Groove the ID

2:46
9. Cutoff

1:22

Tutorial 5

Tutorial 5 covers the Thread toolpath and Stock Flip.
1. Intro

0:56
2. Geometry Creation

6:59
3. Tool Settings and Stock Setup

1:43
4. Face, Rough, and Finish

3:32
5. Machine the 1/2-13 UNC Groove and Thread

5:59
6. Center Drill and Drill

2:32
7. Stock Flip

0:60
8. Face, Rough, and Finish the Flipped Part

2:48
9. Machine the Grooves of the Flipped Part

2:28
10. Machine the 5/8-18 UNF Thread

2:09
11. Center Drill and Drill the Flipped Part

2:23

Tutorial 6

Tutorial 6 includes Stock Advance and Lathe Tailstock operations.
1. Intro

0:60
2. Wireframe Creation

9:37
3. Tool Settings and Stock Setup

2:34
4. Face, Rough, and Finish the OD

3:32
5. Machine the Relief Grooves

2:17
6. Machine the Threads

3:53
7. Center Drill, Drill, and Advance the Stock and Tailstock

2:06
8. Machine the Grooves of the Advanced Stock

4:14

Tutorial 7

Tutorial 7 covers machining a part in a Vertical Turret Lathe (VTL machine). We will bring in a part from SolidWorks and manipulate the geometry appropriately within Mastercam.
1. Intro

0:52
2. Open the Geometry, Create Turn Profile

1:42
3. Add VTL Machine Definition, Setup Tool Settings and Stock

4:44
4. Face, Rough, and Finish the Od

2:51
5. Center Drill and Drill

3:59
6. Rough and Finish the ID

2:38
7. Groove the ID

3:17
8. Machine the Threads

3:13

Exercises

Exercises
1. Analyze Chains

5:39
2. Analyze Commands

5:17
3. Break

1:34
4. Chaining

5:38
5. Chamfer Entities and Chamfer Chain

3:02
6. Create Arc Tangent

1:44
7. Create Arcs

2:44
8. Create Fillet

1:34
9. Create Line Tangent

1:11
10. Create Lines

2:59
11. Create Point Position

2:03
12. Create Rectangle

2:12
13. Join

1:60
14. Managing Attributes and Levels

2:39
15. Transform - Mirror

1:51
16. Transform - Offset

2:43
17. Transform - Rotate

1:32
18 - Transform - Translate

1:59
19. Trim

2:29

Write a review

Your name
Rating Required

1 2 3 4 5
Comment Required
Click here

× Pasted as rich text.   Paste as plain text instead

Only 75 emoji are allowed.

× Your link has been automatically embedded.   Display as a link instead

× Your previous content has been restored.   Clear editor

× You cannot paste images directly. Upload or insert images from URL.

Insert image from URL
×

Desktop

Tablet

Phone

harold1121 0

December 28, 2020

Good Course again short but well explained !!

Share this review

Link to review

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.