Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Mastercam 2022 Mill Essentials eCourse

Buy Now
149.00 995.00

This course is designed to familiarize you with the Mastercam user interface (UI) and provide the resources you need to become proficient with 2D geometry creation and toolpaths. If you are new to Mastercam, it will help you quickly develop your Mastercam skill set; if you are already using the software, (perhaps an older version) it will get you up-to-date and enhance your abilities. 

Below you will find an overview of the eCourse video content organized by tutorial and respective video segments. Each tutorial will walk you through creating geometry, applying then verifying toolpaths and generating G-Code for a machinable part. This course will take approximately 13 hours to complete.

All videos in the eCourse are Closed Captioned

Introduction
  1. Mastercam 2022 Workspace Video
    10:32
Tutorial 1

  1. Tutorial 1 covers Facing, Circle Mill, Drilling, and Contour Toolpaths

  2. 1. Intro
    1:02
  3. 2. Geometry Creation
    3:03
  4. 3. Machine Definition and Stock Setup
    1:31
  5. 4. Face
    3:15
  6. 5. Circle Mill the Large Hole
    4:07
  7. 6. Circle Mill the Inner Hole
    3:06
  8. 7. Spot Drill and Drill
    4:47
  9. 8. Chamfer the Large Hole
    3:40
  10. 9. Contour to Machine the Corners
    3:08
Tutorial 2

  1. Tutorial 2 covers Aligning Parts in a Vice, Multiple Setups, Slot Mill, Pocket, High Speed Dynamic Contour, High Speed Dynamic Mill, and Contour Toolpaths

  2. 1. Intro
    1:27
  3. 2. Geometry Creation
    8:51
  4. 3. Save the Vice as an Educational File
    1:30
  5. 4. Merge the Vice Geometry
    5:06
  6. 5. Machine Definition and Stock Setup
    0:41
  7. 6. Slot Mill
    5:06
  8. 7. Pocket
    3:45
  9. 8. Dynamic Contour to Finisht the Pockets
    3:26
  10. 9. Dynamic Mill the Outside Profile
    4:04
  11. 10. Contour to Finish the Outside Profile
    2:06
  12. 11. Stock Model
    0:53
  13. 12. Create Setup #2
    3:07
  14. 13. Create the Soft Jaw Vice
    3:42
  15. 14. Merge the Part Geometry
    5:47
  16. 15. Merge the Soft Jaw Vice
    2:16
  17. 16. Face the Part
    3:59
Tutorial 3

  1. Tutorial 3 covers 2D High Speed Dynamic Mill, Contour, 2D High Speed Area Mill, Transform-Rotate, and Drill toolpaths

  2. 1. Intro
    1:46
  3. 2. Wireframe Creation
    13:07
  4. 3. Solid Creation
    4:43
  5. 4. Machine Definition and Stock Setup
    0:41
  6. 5. Dynamic Mill the Steps
    4:14
  7. 6. Contour to Finsh the Walls
    2:49
  8. 7. Area Mill One Pocket
    3:41
  9. 8. Toolpath Transform Rotate
    2:15
  10. 9. Contour to Finish the Pocket Walls
    4:47
  11. 10 Spot Drill the Holes
    3:15
  12. 11. Drill the Holes
    2:27
  13. 12. Chamfer the Outside Diameter
    2:27
  14. 13. Chamfer the Pockets
    2:01
  15. 14. Create Setup #2
    1:38
  16. 15. Area Mill the Bottom Pocket
    2:36
  17. 16. Contour to Finish the Bottom Pocket
    2:58
Tutorial 4

  1. Tutorial 4 covers Multiple Setups, 2D High Speed Area Mill, 2D High Speed Area Mill with Remachining Enabled, Drill, Chamfer Drill, and Thread Mill toolpaths

  2. 1. Intro and Open Geometry
    2:06
  3. 2. Machine Definition and Stock Setup
    0:35
  4. 3. Area Mill One Pocket
    3:01
  5. 4. Area Mill the Lower Pocket
    3:07
  6. 5. Remachine the Pockets
    2:46
  7. 6. Drill the Top Holes
    2:37
  8. 7. Chamfer the Top Holes
    1:44
  9. 8. Tap the Top Holes
    2:12
  10. 9. Create Setup #2
    1:15
  11. 10. Chamfer Drill the Front Holes
    1:27
  12. 11. Drill and Tap the Front Holes
    3:56
  13. 12 Drill and Tap the Large Front Hole
    4:08
  14. 14. Create Setup #3
    1:07
  15. 15. Slot Mill the Left Side Slot
    3:04
Tutorial 5

  1. Tutorial 5 covers 2D High Speed Dynamic Mill, 2D High Speed Area Mill, 2D High Speed Blend Mill, and 2D High Speed Peel Mill

  2. 1. Intro
    1:08
  3. 2. Solid Creation
    5:12
  4. 3. Machine Definition and Stock Setup
    0:49
  5. 4. Dynamic Mill
    3:39
  6. 5. Area Mill
    3:21
  7. 6. Blend Mill
    3:37
  8. 7. Peel Mill
    4:40
  9. 8. Model Chamfer
    3:34
Tutorial 6

  1. Tutorial 6 covers 2D High Speed Dynamic Mill, Feature Based Drilling (FBM Drill), Pocket, and Contour Toolpaths

  2. 1. Intro
    1:14
  3. 2. Wireframe Creation
    5:58
  4. 3. Solid Creation
    3:17
  5. 4. Machine Definition and Stock Setup
    0:38
  6. 5. Dynamic Mill the Pockets
    3:16
  7. 6. FBM Drill
    6:41
  8. 7. Dynamic Mill the Profile
    2:28
  9. 8. Finish the Pockets
    2:17
  10. 9. Contour to Finish the Outside Profile
    2:30
  11. 10. Engrave the Letters
    2:34
Tutorial 7

  1. Tutorial 7 covers modifying vise geometry and aligning part geometry in the vise

  2. 1. Vice
    10:22
Exercises

  1. These exercises were recorded in Mastercam 2020. The instructions still apply to 2022.

  2. Analyze Chains
    5:39
  3. Analyze Commands
    5:17
  4. Break
    1:34
  5. Chaining
    5:38
  6. Create Arc Tangent
    1:44
  7. Create Arcs
    2:44
  8. Create Fillet
    1:34
  9. Create Line Tangent
    1:11
  10. Create Lines
    2:59
  11. Create Point Position
    2:03
  12. Create Rectangle
    2:12
  13. Managing Attributes and Levels
    2:39
  14. Transform - Mirror
    1:51
  15. Transform - Offset
    2:43
  16. Transform - Rotate
    1:32
  17. Transform - Translate
    1:59
  18. Trim
    2:29

Write a review


Guest


JasK

0

  • 3
  

MasterCam 2022 learning addition is no longer available, some dialogue box are totally different from the 2024 leaning addition and  has caused me much confusion, especially because I am at the learning phase. I was wondering if there will be an updating parts of the videos where there are impactful differences? 

Understanding Mastercam is difficult for a newbie like myself, especially when there are many upgrades from earlier version to the new one.

Share this review

Link to review
Timothy Grant

0

  • 4
   1 of 1 member found this review helpful 1 / 1 member

A lots of learning for me as a beginner.  The instructor is fast explained, but can slowed down speed and pause to rewinds then repeat again to get better understanding.  I enjoyed this lesson would watch again.

Share this review

Link to review
bradhowe

0

  • 4
   1 of 2 members found this review helpful 1 / 2 members

As a user from 9 years ago, this course quickly got me back up to speed. I read one other student found the video too fast to follow along. I too found this to be the case, but you can slow the speed of video to 75% or 50% and problem solved. Great course in my opinion.   

Share this review

Link to review
Marco P

0

  • 4
   2 of 3 members found this review helpful 2 / 3 members

sometime explanation is to fast if trying to test the process at the same time

i enjoy it for first lesson.

Share this review

Link to review

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Useful Links

Contact Info

Subscribe to eMastercam News

 

Legal

Privacy Policy

Store Terms & Conditions

Forum Guidelines

Follow us

×
×
  • Create New...