Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Training Tutorials (Imperial)

13 files

  1. From $39.99

    Mastercam X4 Mill Level 1 Training Tutorial (PDF)

    The Mastercam X4 Mill Level 1 Training Tutorial puts a greater emphasis on the machinability of parts by offering suggested fixtures, setup sheets, recommended tool setups and grouping for multiple setup scenarios. Clearly laid out objectives and dimensioned step previews make it easier than ever to complete the 10 included tutorials. Additionally, 17 practice exercises and a General Notes chapter provide useful tools, shortcuts and 2D toolpath parameter descriptions that round out this 700+ page book.
     
    Topics covered include dynamic plane and dynamic mill toolpaths, 2D geometry and solids creation, drilling, tapping, contouring, pocketing, circle milling, slot milling, 2D high speed toolpaths, stock setup, tool settings and WCS in multiple fixture applications.

    0 comments

    Updated

  2. From $39.99

    Mastercam X4 Mill Level 3 Training Tutorial (PDF)

    The Mastercam X4 Mill Level 3 Training Tutorial now puts more emphasis on the machinability of example parts by offering suggested fixtures, tool setups and grouping for multiple setup scenarios. Clearly laid out objectives and dimensioned step previews make it easier than ever to complete the 8 included tutorials. Additionally, 8 practice exercises and a General Notes chapter provide useful tools, shortcuts and 3D toolpath parameter descriptions that round out this 550+ page book.
     
    Topics covered include 3D wireframe and surface geometry creation, Surface Finish and Roughing toolpaths, advanced Surface High Speed toolpaths, advanced Toolpath Refinement, C-Hooks, STL Stock creation and its use in solid model verification.

    0 comments

    Updated

  3. From $39.99

    Mastercam X4 4/5 Axis Training Tutorial (PDF)

    These training tutorials are intended for the advanced Mastercam user. There are 10 sample projects, plus general notes on 4/5 Axis Milling. Topics covered are 3D Geometry Creation, Axis Substitution, Rotary Axis Positioning, 5 Axis Drilling, Rotary 4-Axis, Swarf 5-Axis, Flow 5-Axis Toolpaths, Curve 5-Axis, Msurf 5-Axis and Port 5-Axis. These comprehensive notes also include information on Rolldie C-Hooks.

    0 comments

    Updated

  4. From $39.99

    Mastercam X4 Advanced Multiaxis Training Tutorial (PDF)

    Intended for the advanced Mastercam user, this book contains projects demonstrating various Advanced Multiaxis milling applications. The first tutorials introduce the reader to the simplified user interface featuring application derived toolpaths and later transitions to the more advanced interface. Topics covered include Projection and Port machining applications, Advanced Multiaxis Swarf & Pencil toolpaths, Advanced Multiaxis Surface Roughing & Finishing toolpaths and several Gouge Check Strategies.

    0 comments

    Updated

  5. From $30

    Mastercam X4 Solids Training Tutorial (PDF)

    The Mastercam X4 Solids Training Tutorial offers concise, step-by-step instructions on creating 3D wireframe and solid geometry. Six Tutorials illustrate a variety of useful solid commands. Topics covered include Extrude, Revolve, Sweep and Boolean. This book also demonstrates creating solid geometry from surfaces, using loft commands, shell, chamfer and fillet features.

    0 comments

    Updated

  6. From $39.99

    Mastercam X4 Beginner Training Tutorial (PDF)

    This book provides a comprehensive step by step approach to learning Mastercam. It contains pages of projects, helpful hints.The book covers six mill part projects, two lathe projects, three solid projects and an additional 17 exercises. Each tutorial walks you through all the procedures from Geometry Creation to Toolpath instructions, Verification and G?Code Generation.
     
    The material covered includes 2D Geometry and Solids Creation, Drilling, Tapping, Contouring, Pocketing, Circle Milling and Slot Milling. It also contains 2D High Speed Toolpaths. Explanations are given for the use of transforming toolpaths as well as proper Stock Setup and Tool Settings. The Beginner Training Tutorials also include a General Notes chapter with useful tools and shortcuts that make the software easier to use. A description of the 2D toolpath parameters of the Solid menu and Operations Manager are also covered in the General Notes.

    0 comments

    Updated

  7. From $30

    Mastercam X4 Indexing Projects - Tombstone & Chuck (PDF)

    This book uses a variety of projects to describe the use of the View Manager for working with Cplanes and work offsets. It contains useful information for defining and working with different standard and non-standard planes and takes a look at using Mastercam's Transform Toolpaths in a multiple fixture environment. The last project covers Cplanes and work offset settings for a chuck indexing. Each tutorial guides you through Geometry Creation, Toolpathing, Verification and G-Code generation.

    0 comments

    Updated

  8. From $30

    Mastercam X4 Wire Training Tutorial (PDF)

    This Practical set of training tutorials cover 2D & 3D Geometry, Wirepath Creation such as Contour, Multiple Contours, 4-Axis Wirepath, and No Core Wirepath. Each tutorial walks you through Geometry Creation to G-Code Generation.
     
    Six mechanical parts projects provide step-by-step instructions for Mastercam Wire. Each section contains screen shots and windows/menus for Start, Thread, Cut, and Work (STCW) Parameters, Wire Parameters, Lead In/Out, Contour Parameters, Tabs, and more.

    0 comments

    Updated

  9. From $30

    Mastercam X4 Art Training Tutorial (PDF)

    This tutorial is a comprehensive step-by-step approach to learning Mastercam Art. There are six part projects that demonstrate how to create intricate 3D sculpted images from simple 2D artwork. Each tutorial walks through Geometry Creation to Toolpath instructions, Verification and G-Code generation. Instructions are also provided for importing a scanned bitmap, clip art or a CAD file and converting it into machinable geometry.

    0 comments

    Updated

  10. From $35

    Mastercam X4 Lathe Training Tutorial (PDF)

    The Mastercam X4 Lathe Training Tutorial consists of 7 part-oriented tutorials and 14 practice exercises. Topics covered include 2D toolpaths such as Face, Rough, Finish, Drilling, Inside Boring, Cutoff, Threads and Canned Cycles for Rough and Finish. It also covers 3D geometry creation and C-Axis toolpaths such as Face, Cross Contouring, C-Axis Drilling and C-Axis Contouring.

    0 comments

    Updated

  11. From $35

    Mastercam X4 Design Training Tutorial (PDF)

    The Mastercam X4 Design Training Tutorial provides a comprehensive step-by-step approach to learning Mastercam Design. It contains over 540 pages of projects and helpful hints. The book's 18 tutorials now feature step previews, making it easier than ever to follow. Each tutorial walks through all the procedures required for each part's geometry creation. Additionally, 26 practice exercises are provided.
     
    The material covered includes 2D Geometry and Solids Creation. Explanations are given for the use of WCS in multiple fixture applications. The Design Training Tutorials also includes a General Notes chapter with useful tips, tools, shortcuts and descriptions of each option on the Solid menu.

    0 comments

    Updated

  12. From $39.99

    Mastercam X4 Project Workbook (PDF)

    Ideal for High School students yet practical for hobbyists, the Project workbook provides a great approach to learning Mastercam for those who prefer project-based learning. Eleven projects - some consisting of multiple parts - are provided with step-by-step instructions, helpful hints, basic machining and CAD/CAM overviews.

    0 comments

    Updated

  13. From $39.99

    Mastercam X4 Router Training Tutorial (PDF)

    This book provides a comprehensive step-by-step approach to learning all levels of Mastercam Router. It includes 9 tutorials that cover 2D Geometry, Drilling, Contouring, Pocketing, Nesting, importing bitmaps using Raster to Vector and tips on modifying the resulting geometry. Instructions on proper Stock Setup, Tool Settings, creating profile bits and using the metric system are provided as well as various other helpful hints. Each tutorial is complete with instructions from Geometry Creation to Toolpath instructions, Verification and G-Code Generation.
     
    A General Notes chapter outlines useful tools and shortcuts that make the software easier to use. It also offers an alphabetical listing of 2D toolpath parameter descriptions, tips on creating 3D geometry, a look at Machine Properties and the Toolpath Manager.

    0 comments

    Updated


Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...