33 files

  1. Free

    Intro to Multiaxis Training Tutorial Downloads

    These files are intended for those who have purchased the Mastercam X6 Intro to Multiaxis Training Tutorial, available in print form here and eBook form here.
    Included files:
     

    TUTORIAL 1_CONICALHELIX .MCX-6 TUTORIAL 1_CYLINDRICALHELIX .MCX-6 TUTORIAL 2 .MCX-6 TUTORIAL 3.MCX-6 TUTORIAL 4.MCX-6 TUTORIAL 5.MCX-6 TUTORIAL 6.MCX-6 TUTORIAL 7.MCX-6 TUTORIAL 8.MCX-6 TUTORIAL 9.MCX-6 TUTORIAL 10.MCX-6 TUTORIAL 11.MCX-6

    1,248 downloads

    Updated

  2. Free

    Lathe Training Tutorial Downloads

    These files are intended for those who have purchased the Mastercam X6 Lathe Training Tutorial, available in print form here and eBook form here.
    Included files:

    TUTORIAL#9.SLDPRT

    877 downloads

    Updated

  3. Free

    Intro to Multiaxis METRIC Training Tutorial Downloads

    These files are intended for those who have purchased the Mastercam X6 Intro to Multiaxis METRIC Training Tutorial, available in print form here and eBook form here.
    Included files:
     

    TUTORIAL 1_CONICALHELIX .MCX-6 TUTORIAL 1_CYLINDRICALHELIX .MCX-6 TUTORIAL 2 .MCX-6 TUTORIAL 3.MCX-6 TUTORIAL 4.MCX-6 TUTORIAL 5.MCX-6 TUTORIAL 6.MCX-6 TUTORIAL 7.MCX-6 TUTORIAL 8.MCX-6 TUTORIAL 9.MCX-6 TUTORIAL 10.MCX-6 TUTORIAL 11.MCX-6

    862 downloads

    Updated

  4. Free

    Lathe METRIC Training Tutorial Downloads

    These files are intended for those who have purchased the Mastercam X6 Lathe METRIC Training Tutorial, available in print form here and eBook form here.
    Included files:
     

    TUTORIAL#9 Metric.SLDPRT

    435 downloads

    Updated

  5. Free

    Mill level 1 Training Tutorial Downloads

    These files are intended for those who have purchased the Mastercam X6 Mill level 1 Training Tutorial, available in print form here and eBook form here.
     
    Included files:
     

    TUTORIAL #10 EXERCISE.MCX-6
    Tutorial #8 Exercise #1.SLDPRT
    Tutorial #8.SLDPRT
    TUTORIAL#10.MCX-6
    TUTORIAL #4 EXERCISE.PDF

    1,906 downloads

    Updated

  6. Free

    Mill level 1 METRIC Training Tutorial Downloads

    These files are intended for those who have purchased the Mastercam X6 Mill level 1 METRIC Training Tutorial, available in print form here and eBook form here.
    Included files:

    TUTORIAL #10 EXERCISE.MCX-6 TUTORIAL #10.MCX-6 Tutorial #8 Exercise #1.SLDPRT Tutorial #8.SLDPRT

    512 downloads

    Updated

  7. Free

    Mill level 3 Training Tutorial Files

    These files are intended for those who have purchased the Mastercam X6 Mill level 3 Training Tutorial, available in print form here and eBook form here.
    Included files:

    TUTORIAL6 WIREFRAME.MCX-6 TUTORIAL6_ EXERCISE WIREFRAME.MCX-6 TUTORIAL7 WIREFRAME.MCX-6 TUTORIAL7_ EXERCISE.MCX-6

    1,000 downloads

    Updated

  8. Free

    Mill level 3 METRIC Training Tutorials

    These files are intended for those who have purchased the Mastercam X6 Mill level 3 METRIC Training Tutorial, available in print form here and eBook form here.
    Included files:

    TUTORIAL6 WIREFRAME-MM.MCX-6 TUTORIAL6_ EXERCISE WIREFRAME-MM.MCX-6 TUTORIAL7 WIREFRAME-MM.MCX-6 TUTORIAL7_ EXERCISE WIREFRAME-MM.MCX-6

    399 downloads

    Updated

  9. Free

    Solids Training Tutorial Files

    These files are intended for those who have purchased the Mastercam X6 Solids Training Tutorial, available in print form here and eBook form here.
    Included files:

    SOLID_6.MCX-6 SOLIDS_6 EXERCISE.MCX-6

    554 downloads

    Updated

  10. Free

    Solids METRIC Training Tutorial Downloalds

    These files are intended for those who have purchased the Mastercam X6 Solids METRIC Training Tutorial, available in print form here.
    Included files:
     

    SOLIDS_06.MCX-6 TUTORIAL #6 EXERCISE.MCX-6

    351 downloads

    Updated

  11. Free

    Router Metric Training Tutorial Downloads

    These files are intended for those who have purchased the Mastercam X6 Router Metric Training Tutorial, available in print form here and eBook form here.
     
    Files included:
     

    TUTORIAL 8 - METRIC.MCX-6 Tutorial_06 - metric.jpg

    241 downloads

    Updated

  12. Free

    Router Training Tutorial Downloads

    These files are intended for those who have purchased the Mastercam X6 Router Training Tutorial, available in print form here and eBook form here.
     
     
    Files included:
     

    TUTORIAL #8.MCX-6 Tutorial_06.jpg

    299 downloads

    Updated

  13. Free

    Lathe Professional Courseware Downloads

    These files are intended for those who have purchased the Mastercam X6 Lathe Professional Courseware, available in print form here and eBook form here.
     
    Files included:
     
     

    ANALYZE CHAIN.MCX-6 ANALYZE.MCX-6 ATTRIBUTES.MCX-6 BREAK.MCX-6 CHAIN.MCX-6 CHAMFER.MCX-6 CHANGE ATTRIBUTES.MCX-6 CREATE_ARC.MCX-6 CREATE_ARC_TANG.MCX-6 CREATE_LINES.MCX-6 CREATE_POINT_POS.MCX-6 CREATE_RECTANGLE.MCX-6 Drawing_14.sldprt FILLET.MCX-6 JOIN.MCX-6 LEVELS.MCX-6 MIRROR.MCX-6 OFFSET.MCX-6 TRANSLATE.MCX-6 TRIM.MCX-6

    457 downloads

    Updated

  14. Free

    Design METRIC Training Tutorial Downloads

    These files are intended for those who have purchased the Mastercam X6 Design Metric Training Tutorial, available in print form here and eBook form here.
     
    Files included:
     

    TUTORIAL #10 - METRIC.MCX-6

    306 downloads

    Updated

  15. Free

    Design Training Tutorial Downloads

    These files are intended for those who have purchased the Mastercam X6 Design Training Tutorial, available in print form here and eBook form here.
     
    Files included:
     

    TUTORIAL #10 - INCH.MCX-6

    382 downloads

    Updated

  16. Free

    Advanced Multiaxis METRIC Training Tutorial Downloads

    These files are intended for those who have purchased the Mastercam X6 Advanced Multiaxis Metric Training Tutorial, available in print form here and eBook form here.
     
    Files included:
     

    TUTORIAL 1 PROJECT5 AXIS _METRIC.MCX-6 TUTORIAL 2 SWARF_METRIC.MCX-6 TUTORIAL 3 FINISH BLADE SURFACES_METRIC.MCX-6 TUTORIAL 4 IMPELLER WITHOUT TILT CURVE_METRIC_TEST.MCX-6 TUTORIAL 5 COLLISION CONTROL STRATEGIES_METRIC.MCX-6

    1,253 downloads

    Updated

  17. Free

    Advanced Multiaxis Training Tutorial Downloads

    These files are intended for those who have purchased the Mastercam X6 Advanced Multiaxis Training Tutorial, available in print form here and eBook form here.
     
    Files included:
     

    TUTORIAL 1 PROJECT5 AXIS.MCX-6 TUTORIAL 2 SWARF.MCX-6 TUTORIAL 3 FINISH BLADE SURFACES.MCX-6 TUTORIAL 4 IMPELLER WITHOUT TILT CURVE.MCX-6 TUTORIAL 5 COLLISION CONTROL STRATEGIES.MCX-6

    1,901 downloads

    Updated

  18. Free

    Mill Level 1 Professional Courseware Downloads

    These files are intended for those who have purchased the Mastercam X6 Mill level 1 Professional Courseware, available in print form here and eBook form here.
     
     
    Machining Exercises files:
     

    2DPOCKET.MCX-6 CHAMFERPART2D.MCX-6 CIRCMILL.MCX-6 CONTOUR ONEWAY.MCX-6 CONTOUR.MCX-6 DYNAMIC_HS_TOOLPATHS.MCX-6 FACE.MCX-6 FBM_EXERCISE.MCX-6 HIGH SPEED EXERCISE.MCX-6 OPEN POCKET.MCX-6 PEEL_MILLING.MCX-6 SOLID DRAWING2.MCX-6 TRAINING DRAWING1.MCX-6 TRAINING DRAWING18.MCX-6 TRAINING DRAWING20.MCX-6 TRAINING DRAWING3.MCX-6 TRAINING DRAWING4.MCX-6 WIREFRAME_RULED.MCX-6 WIREFRAME_SWEPT.MCX-6
     
     
    Training Exercise files:
     

    ANALYZE .MCX-6 ANALYZE CHAIN.MCX-6 ATTRIBUTES.MCX-6 BREAK.MCX-6 CHAIN1.MCX-6 CHANGE ATTRIBUTES.MCX-6 CREATE_ARC.MCX-6 CREATE_ARC_POLAR.MCX-6 CREATE_ARC_TANG.MCX-6 CREATE_LINE_TANGENT.MCX-6 CREATE_LINES.MCX-6 CREATE_POINT_POS.MCX-6 CREATE_RECTANGLE.MCX-6 CUBE.MCX-6 EXTRUDE.MCX-6 FILLET.MCX-6 GEOMETRY.DWG GEOMETRY.IGS JOIN.MCX-6 LEVELS.MCX-6 MIRROR.MCX-6 OFFSET.MCX-6 Part1.SLDPRT Part2.SLDPRT POLYGON.MCX-6 ROTATE.MCX-6 SOLID_CHAMFER.MCX-6 TRANSLATE.MCX-6 TRIM.MCX-6

    1,077 downloads

    Updated

  19. Free

    Mill Level 3 Professional Courseware Downloads

    These files are intended for those who have purchased the Mastercam X6 Mill level 3 Professional Courseware, available in print form here and eBook form here.
     
     
    Geometry training exercises:

    2 SURFACE BLEND.MCX-6
    3 SURFACE BLEND.MCX-6
    CPLANE-NORMAL.MCX-6
    CPLANES ENTITY - ROTATE.MCX-6
    CUBE.MCX-6
    CURVES.MCX-6
    DRAFT_EXTRUDED.MCX-6
    DYNAMIC PLANE.MCX-6
    FENCESURFACE.MCX-6
    FILLET_BLEND.MCX-6
    HAIRDRYER.MCX-6
    NETSURF1.MCX-6
    NETSURF3.MCX-6
    NETSURF4.MCX-6
    NETSURF5.MCX-6
    PRIMITIVES.MCX-6
    RUL2.MCX-6
    RULED-SYNC.MCX-6
    SURFACE_FILLET.MCX-6
    SURFACING_1.MCX-6
    SURFACING_10.MCX-6
    SURFACING_11.MCX-6
    SURFACING_2.MCX-6
    SURFACING_3.MCX-6
    SURFACING_4.MCX-6
    SURFACING_5.MCX-6
    SURFACING_6.MCX-6
    SURFACING_7.MCX-6
    SURFACING_8.MCX-6
    SURFACING_9.MCX-6
    SWEPT1.MCX-6
    SWEPT2.MCX-6
    SWEPT3.MCX-6
    SWEPT4.MCX-6
    TEA POT.MCX-6
    TRIM SURF TO SURF.MCX-6
    TRIM TO CURVES.MCX-6
    TRIM TO PLANE.MCX-6

    Toolpath training exercises:

    HST AREA CLEARANCE AND HYBRID.MCX-6
    HST OPTIROUGH AND WATERLINE.MCX-6
    HST RADIAL SPIRAL.MCX-6
    HST-CORE_ROUGHING.MCX-6
    RESTMILL PART.MCX-6
    ROUGH POCKET_ FINISH FLOWLINE.MCX-6
    SURFACE PLUNGE PARALLEL AND PENCIL .MCX-6
    SURFACE POCKET CONTOUR AND SCALLOP.MCX-6
    SURFACE RESTMILL AND SHALLOW.MCX-6
    SURFACE RESTMILL STL.MCX-6

    1,438 downloads

    Updated

  20. Free

    Multiaxis Professional Courseware Downloads

    These files are intended for those who have purchased the Mastercam X6 Multiaxis Professional Courseware, available in print form here and eBook form here.
     
    Files included:

    1-CUT PATTERN 1.MCX-6
    4 - AXIS ROTARY TOOLPATH - AXIAL DAMPENING.MCX-6
    4 - AXIS ROTARY TOOLPATH.MCX-6
    4AXIS INDEX_A AXIS.MCX-6
    5AX_ENGRAVING.MCX-6
    AREA SETTINGS.MCX-6
    AXIS SUBSTITUTION - CREATING A CONICAL HELIX DRAWING.MCX-6
    AXIS SUBSTITUTION - CREATING A CONICAL HELIX.MCX-6
    AXIS SUBSTITUTION - CREATING A CYLINDRICAL HELIX DRAWING.MCX-6
    AXIS SUBSTITUTION - CREATING A CYLINDRICAL HELIX.MCX-6
    AXIS SUBSTITUTION - ROLL THE GEOMETRY.MCX-6
    AXIS SUBSTITUTION - ROTARY AXIS POSITIONING & TRANSFORM.MCX-6
    AXIS SUBSTITUTION - UNROLL THE GEOMETRY.MCX-6
    BARRELCAM DRAWING.MCX-6
    BARRELCAM.MCX-6
    CAMSHAFT.MCX-6
    CURVE 5 AXIS CURVE TYPE 3D CURVES.MCX-6
    CURVE 5 AXIS OUTPUT FORMAT.MCX-6
    CURVE 5 AXIS REVIEW FILE.MCX-6
    CURVE 5 AXIS TIP CONTROL.MCX-6
    CURVE 5 AXIS TOOL AXIS CONTROL CHAIN.MCX-6
    CURVE 5 AXIS TOOL AXIS CONTROL FROM POINT.MCX-6
    CURVE 5 AXIS TOOL AXIS CONTROL LINES.MCX-6
    CURVE 5 AXIS TOOL AXIS CONTROL PLANE.MCX-6
    CURVE 5 AXIS TOOL AXIS CONTROL TO POINT.MCX-6
    CURVE TYPE SURFACE EDGE ALL.MCX-6
    CURVE TYPE SURFACE EDGE ONE.MCX-6
    CURVE5 AXIS PROJECTION NORMAL TO SURFACE.MCX-6
    CUT PATTERN 1-COLLISION CONTROL.MCX-6
    CUT PATTERN 1.MCX-6
    DRILL ENTITY POINTS.MCX-6
    DRILL POINT _LINES TIP CONTROL ORIGINAL POINT.MCX-6
    DRILL TOOL AXIS CONTROL PLANE.MCX-6
    FLOW 5X-AXIS LIMITS.MCX-6
    GOUGE CHECK.MCX-6
    IMPELLER WITH TILTED CURVE.MCX-6
    IMPELLER WITHOUT TILT CURVE.MCX-6
    MOLD BOTTLE.MCX-6
    MSURF CUT PATTERN SURFACE.MCX-6
    OUTPUT FORMAT.MCX-6
    PORT 5 AXIS.MCX-6
    SORTING AND LINKING.MCX6
    SWARF 5 AXIS WALLS CHAINS.MCX-6
    SWARF OUTPUT FORMAT 4 AXIS.MCX-6
    SWARF OUTPUT FORMAT 5AXIS.MCX-6
    SWARF TIP CONTROL LOWER RAIL.MCX-6
    TOMBSTONE.MCX-6
    TOOL AXIS CONTROL SIDE TILT.MCX-6
    TOOLPLANE.MCX-6
    TURBINE BLADE.MCX-6
    WORM GEAR .MCX-6

    1,059 downloads

    Updated

  21. Free

    Router Professional Courseware Downloads

    These files are intended for those who have purchased the Mastercam X5 Mill level 3 Professional Courseware, available in print form here and eBook form here.
     
     
    Machining exercises files:
     

    BLOCK DRILLING.MCX-6 COMPUTER DESK.MCX-6 FRAME NESTED.MCX-6 NESTING GEOM.MCX-6 SPORTS1.bmp
     
    Training exercises files:
     

    ANALYZE .MCX-6 ANALYZE CHAIN.MCX-6 ATTRIBUTES.MCX-6 BREAK.MCX-6 CHAIN1.MCX-6 CHANGE ATTRIBUTES.MCX-6 COMPUTER DESK.MCX-6 CREATE_ARC.MCX-6 CREATE_ARC_POLAR.MCX-6 CREATE_ARC_TANG.MCX-6 CREATE_LINE_TANGENT.MCX-6 CREATE_LINES.MCX-6 CREATE_POINT_POS.MCX-6 CREATE_RECTANGLE.MCX-6 CUBE.MCX-6 EXTRUDE.MCX-6 FILLET.MCX-6 FRAME NESTED.MCX-6 Geometry.DWG Geometry.IGS JOIN.MCX-6 LEVELS.MCX-6 MIRROR.MCX-6 NESTING GEOM.MCX-6 OFFSET.MCX-6 Part1.SLDPRT Part2.SLDPRT PC Router Training Exercise Files.zip POLYGON.MCX-6 ROTATE.MCX-6 SOLID_CHAMFER.MCX-6 Thumbs.db Training Exercises.zip TRANSLATE.MCX-6 TRIM.MCX-6

    449 downloads

    Updated

  22. Free

    Handbook Volume 1 Downloads

    These files are intended for those who have purchased the Mastercam X6 Design Training Tutorial, available in print form here (eBook version coming soon).
     
    Files included:
     
     
    Extras:
     

    AppxE-CNC Setups_12142006.pdf AppxF_Machine and Control Defs_12142006.pdf geneva gear.pdf ASIMPLE.NC CELL PHONE.X_T CONNECTING ROD.X_T HOUSING COVER.X_T THROTTLE LEVER.X_T XFORM_UNROLL.X_T
     
    MCX Files:
     

    3D BLOCK.MCX-6 3D CONTOUR.MCX-6 3D WEDGE.MCX-6 5X5X5.MCX-6 ARRAY.MCX-6 BELL CRANK.MCX-6 BLOCK.MCX-6 CAVITY.MCX-6 CHAIN BREAKER.MCX-6 CHGREC_EX1_REV-A.MCX-6 CHGREC_EX1_REV-B.MCX-6 CLEARANCE PLANE.MCX-6 CONTROL HORN.MCX-6 DISTRIBUTOR MANIFOLD.MCX-6 ELECTRONIC FIXTURE.MCX-6 FIXTURE PLATE.MCX-6 GUSSET PLATE.MCX-6 INDEX USING PLANES.MCX-6 INDEX USING TRANSFORM TOOLPATH.MCX-6 LBLOCK.MCX-6 MULTI HEIGHT ISLANDS.MCX-6 MULTI LEVEL POCKETS.MCX-6 MULTI POCKETS_WIRE-SURFACES.MCX-6 MULTI POCKETS-SOLID.MCX-6 PIVOT ASSY.MCX-6 POLAR LINES.MCX-6 REINFORCING PLATE.MCX-6 ROTARY AXIS SUBSTITUTION.MCX-6 SERVO HOUSING.MCX-6 TEST ASSY.MCX-6 TRANSLATE3D.MCX-6 WCS_EX 0.MCX-6 WCS_EX 1.MCX-6 WCS_EX-0_PROGRAMMED.MCX-6 WEDGE WITH ARC.MCX-6 XFORM PRACTICE.MCX-6

    1,197 downloads

    Updated

  23. Free

    Handbook Volume 2 Downloads

    These files are intended for those who have purchased the Mastercam X6 Design Training Tutorial, available in print form here (eBook coming soon)
     
    Files included:
     
     
    Extras:
     

    Clark-Y.txt HOUSING COVER.IGS NC Program Planning Sheet.doc QUIZ_CHAPTER 6_HIGH SPEED POCKET.MCX-6 quiz_chapter-4_airfoil.csv quiz_chapter-4_airfoil.txt
     
    MCX Files:
     

    2BLADEPROP.MCX-6 2SURFBLEND.MCX-6 3DSPLINEEXERCISE.MCX-6 3FILLETBLEND.MCX-6 3SURFBLEND.MCX-6 AREACLEARANCE.MCX-6 CELLPHONE_CH3-QUIZ.MCX-6 CELLPHONE_REMOVEBNDY.MCX-6 CONTOURFINISH.MCX-6 CONTOURROUGH.MCX-6 COREROUGHING.MCX-6 DRAFTSURF.MCX-6 EXTENDTOEDGE.MCX-6 EXTRUDEDSURF.MCX-6 FENCESURF.MCX-6 FENCESURF1.MCX-6 FENCESURF3.MCX-6 FENCESURF4.MCX-6 FILLET SURFACE.MCX-6 FILLETTOCURVE.MCX-6 FILLETTOPLANE.MCX-6 FILLHOLES.MCX-6 FINISHSCALLOP.MCX-6 FLATSURF1.MCX-6 FLOWLINE.MCX-6 GUSSETPLATE.MCX-6 HORIZONTAL.MCX-6 HSTRADIAL.MCX-6 HST-SCALLOP.MCX-6 HSTSPIRAL.MCX-6 LEFTOVER.MCX-6 LOFTWING.MCX-6 NETSURF3.MCX-6 NETSURF5.MCX-6 NETSURF6.MCX-6 NETSURF7.MCX-6 NETSURF9.MCX-6 NOSEPUCK.MCX-6 PARALLELROUGH.MCX-6 PARALLELSTEEP.MCX-6 PENCILPART.MCX-6 PENCILSEAMS.MCX-6 PROJECTBLEND.MCX-6 PROJECTLETTERS.MCX-6 RADIAL.MCX-6 RASTER.MCX-6 REMOVEBNDY.MCX-6 RESTMILL.MCX-6 REVOLVECORNER.MCX-6 REVOLVESURF.MCX-6 ROUGHPLUNGE.MCX-6 ROUGHPOCK.MCX-6 ROUGHPROJCURVES.MCX-6 ROUGHPROJNCI.MCX-6 ROUGHPROJPTS.MCX-6 RULED-1.MCX-6 RULETOPOINT.MCX-6 SHALLOW.MCX-6 SHALLOWFINISH.MCX-6 SKATEBOARD.MCX-6 SPLINE EXERCISES.MCX-6 SPLITMODEL.MCX-6 SPLITSURF.MCX-6 STEEPSHALLOW.MCX-6 SWEPT1-1.MCX-6 SWEPT2-1.MCX-6 SWEPTMANY.MCX-6 TRANSLATE3D.MCX-6 TRIM SURFACE TO SURFACES.MCX-6 TRIM_SURFTOPLANE.MCX-6 TRIMSURF1.MCX-6 TRIMTOCURVES_NORMAL.MCX-6 TRIMTOCURVES_PLANE.MCX-6 UNTRIM.MCX-6 WATERLINE.MCX-6

    1,432 downloads

    Updated

  24. Free

    Art Training Tutorial Downloads

    These files are intended for those who have purchased the Mastercam X6 Art Training Tutorial, available in print form here and eBook form here.
     
    Files Included:
     
    Tutorial #3

    TUTORIAL #3 WIREFRAME.MCX-6
     
    Tutorial #4

    TUTORIAL_04.jpg

    819 downloads

    Submitted

  25. Free

    Indexing Training Tutorial Downloads

    These files are intended for those who have purchased the Mastercam X6 Indexing Training Tutorial, available in print form here and eBook form here.
     
    Files Included:

    TOMBSTONE.MCX-6 TOMBSTONE_PART.MCX-6

    492 downloads

    Submitted

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us