38 files

  1. Free

    These files are intended for those who have purchased the Mastercam X7 Handbook Volume 3, available here.
     
    Files included:
    5X_TEST_PIVOT LOCATION.MCX-7
    AEROSPACE.MCX-7
    AIRFOIL FLOW 5 AXIS.MCX-7
    ANGLE RANGE.MCX-7
    AREA TYPE.MCX-7
    CAMSHAFT.MCX-7
    COLLISION CONTROL SET TO TILTING TOOL AWAY WITH MAX ANGLE.MCX-7
    CONVERT TO 5 AXIS.MCX-7
    CURVE 5 AXIS CURVE TYPE 3D CURVES.MCX-7
    CURVE 5 AXIS TOOL AXIS CONTROL CHAINS.MCX-7
    CURVE 5 AXIS TOOL AXIS CONTROL FROM POINT.MCX-7
    CURVE 5 AXIS TOOL AXIS CONTROL LINES.MCX-7
    CURVE 5 AXIS TOOL AXIS CONTROL PLANE.MCX-7
    CURVE 5 AXIS TOOL AXIS CONTROL TO POINT.MCX-7
    CURVE 5AX SURFACE EDGE ONE MULTIPLE SURFACES2.MCX-7
    CURVE PROJECT NORMAL_PLANE.MCX-7
    CURVE PROJECT NORMAL_SURFACE.MCX-7
    CURVE TYPE SURFACE EDGE ALL.MCX-7
    CURVE TYPE SURFACE EDGE ALL-WITH SEAM.MCX-7
    CURVE TYPE SURFACE EDGE ONE.MCX-7
    CURVE5AX TOOL AXIS CONTROL SURFACE.MCX-7
    CURVE5AX_SPLIT TRIMMED SURFACE.MCX-7
    CUT PATTERN BOX.MCX-7
    CUT PATTERN CYLNDER.MCX-7
    CUT PATTERN SPHERE.MCX-7
    CUT PATTERN SURFACE.MCX-7
    CUT TOLERANCE.MCX-7
    CUTS ALONG CURVE.MCX-7
    DRILL 5 AXIS EXAMPLE.MCX-7
    DRILL ENTITY TYPE POINTS_LINES.MCX-7
    DRILL OUTPUT FORMA.MCX-7
    DRILL OUTPUT FORMAT.MCX-7
    DRILL TIP CONTROL ORIGINAL POINT.MCX-7
    DRILL TIP CONTROL PROJECTED POINT.MCX-7
    DRILL TOOL AXIS CONTROL PLANE.MCX-7
    ENTRY EXIT.MCX-7
    FILTER.MCX-7
    FLOW TOOL AXIS CONTROL BOUNDARY.MCX-7
    FLOW TOOL AXIS CONTROL CHAIN.MCX-7
    FLOW TOOL AXIS CONTROL LINES.MCX-7
    FLOW TOOL AXIS CONTROL SURFACE.MCX-7
    FLOW TOOL AXIS CONTROL TO AND FROM POINTS.MCX-7
    FROM START TO END.MCX-7
    GAP SETTINGS.MCX-7
    GRADUAL ANGLE CHANGE.MCX-7
    IMPELLER.MCX-7
    IMPELLER.STL
    IMPELLER_2.MCX-7
    LASER TRIM CUT.MCX-7
    LIMITS.MCX-7
    MACHINE BY LANES_REGIONS.MCX-7
    MAXIMUM ANGLE STEP.MCX-7
    MESH TOOLPATHS.MCX-7
    MOPH BETWEEN 2 CURVE PATTERN.MCX-7
    MORPH BETWEEN 2 SURFACE GEOMETRY SELECTION.MCX-7
    MORPH BETWEEN 2 SURFACE PENCIL.MCX-7
    MORPH BETWEEN TWO SURFACES.MCX-7
    MOVE TOOL AWAY.MCX-7
    MSURF CUT PATTERN SURFACE.MCX-7
    OUTPUT FORMAT.MCX-7
    PARALLE CUTS.MCX-7
    PARALLEL TO SURFACE.MCX-7
    PORT ADD EXIT BLEND.MCX-7
    PORT MACHINING.MCX-7
    PORT TOOL AXIS CONTROL_CHAIN GEOMETRY.MCX-7
    PORT WITH CURVE.MCX-7
    PORT.MCX-7
    PROJECT CURVES.MCX-7
    PROJECT CURVES_TOOLPATH.MCX-7
    RIB CUT.MCX-7
    RIB CUT.X_T
    ROTARY 4 AXIS AXIAL CUT.MCX-7
    ROTARY 4 AXIS AXIAL DAMPENING LENGTH.MCX-7
    ROTARY 4 AXIS NORMAL TO SURFACE.MCX-7
    ROTARY 4 AXS THROUGH A POINT.MCX-7
    RUN TOOL.MCX-7

    SIDE TILT DEFINITIONS.MCX-7
    SWARF 4-AXIS.MCX-7
    SWARF 5 AXIS WALLS CHAINS.MCX-7
    SWARF 5-AXIS_RAILS-AEROSPACE PART.MCX-7
    SWARF OUTPUT FORMAT 4 AXIS HORIZONTAL.MCX-7
    SWARF OUTPUT FORMAT 5AXIS.MCX-7
    SWARF TIP CONTROL LOWER RAIL.MCX-7
    TILTED FROM CURVE.MCX-7
    TILTED THROUGH CURVE.MCX-7
    TILTED THROUGH LINES.MCX-7
    TILTING STRATEGIES POINT.MCX-7
    TILTING STRATEGIES.MCX-7
    TOOL AXIS CONTROL -RELITIVE TO DIRECTION-1 LINE.MCX-7
    TOOL AXIS CONTROL SURFACE.MCX-7
    TOOL BOX BLADE ROOT MACHINING.MCX-7
    TOOL BOX CAVITY TILT CURVE.MCX-7
    TOOL BOX ELECTRODE.MCX-7
    TOOL BOX IMPELLER BLADE.MCX-7
    TOOL BOX IMPELLER FLOOR.MCX-7
    TOOL BOX PORT EXPERT.MCX-7
    TOOL BOX PROJECTION.MCX-7
    TOOL BOX SWARF MILLING.MCX-7
    TRIM_EXTEND OPTIONS.MCX-7
    TURBINE BLADE.MCX-7
    TURBO_IMPELLER.MCX-7
    TUTORIAL 5 COLLISION CONTROL STRATEGIES.MCX-7
    Z AXIS LIMITS.MCX-7

    1,023 downloads

    Updated

  2. Free

    This file is intended for those who have purchased the Mastercam X7 Intro to Multiaxis Training Tutorial, available here.
     
    Included files:
     
    TUTORIAL 1_CONICALHELIX .MCX-7
    TUTORIAL 1_CYLINDRICALHELIX .MCX-7
    TUTORIAL 10.MCX-7
    TUTORIAL 2 .MCX-7
    TUTORIAL 3.MCX-7
    TUTORIAL 4.MCX-7
    TUTORIAL 5.MCX-7
    TUTORIAL 6.MCX-7
    TUTORIAL 7.MCX-7
    TUTORIAL 8.MCX-7
    TUTORIAL 9.MCX-7

    877 downloads

    Submitted

  3. Free

    This file is intended for those who have purchased the Mastercam X7 Intro to Multiaxis Training Tutorial Metric, available here.
     
    Included files:
     
    TUTORIAL 1_CONICALHELIX .MCX-7
    TUTORIAL 1_CYLINDRICALHELIX .MCX-7
    TUTORIAL 10.MCX-7
    TUTORIAL 2 .MCX-7
    TUTORIAL 3.MCX-7
    TUTORIAL 4.MCX-7
    TUTORIAL 5.MCX-7
    TUTORIAL 6.MCX-7
    TUTORIAL 7.MCX-7
    TUTORIAL 8.MCX-7
    TUTORIAL 9.MCX-7

    405 downloads

    Updated

  4. Free

    These files are intended for those who have purchased the Mastercam X7 Handbook Volume 1, available here.
     
    Files included:
     
    Extras:

    AppxE-CNC Setups_12142006.doc
    AppxF_Machine and Control Defs_12142006.doc
    geneva gear.pdf
    CELL PHONE.X_T
    CONNECTING ROD.X_T
    HOUSING COVER.X_T
    THROTTLE LEVER.X_T
    XFORM_UNROLL.X_T

     
    MCX files:

    3D BLOCK.MCX-7
    3D CONTOUR.MCX-7
    3D WEDGE.MCX-7
    5X5X5.MCX-7
    ARRAY.MCX-7
    BELL CRANK.MCX-7
    BLOCK.MCX-7
    CAVITY.MCX-7
    CHAIN BREAKER.MCX-7
    CHGREC_EX1_REV-A.MCX-7
    CHGREC_EX1_REV-B.MCX-7
    CLEARANCE PLANE.MCX-7
    CONTROL HORN.MCX-7
    DISTRIBUTOR MANIFOLD.MCX-7
    ELECTRONIC FIXTURE.MCX-7
    FIXTURE PLATE.MCX-7
    GUSSET PLATE.MCX-7
    INDEX USING PLANES.MCX-7
    INDEX USING TRANSFORM TOOLPATH.MCX-7
    LBLOCK.MCX-7
    MULTI HEIGHT ISLANDS.MCX-7
    MULTI LEVEL POCKETS.MCX-7
    MULTI POCKETS_WIRE-SURFACES.MCX-7
    MULTI POCKETS-SOLID.MCX-7
    PIVOT ASSY.MCX-7
    POLAR LINES.MCX-7
    REINFORCING PLATE.MCX-7
    ROTARY AXIS SUBSTITUTION.MCX-7
    SERVO HOUSING.MCX-7
    TEST ASSY.MCX-7
    TRANSLATE3D.MCX-7
    WCS_EX 0.MCX-7
    WCS_EX 1.MCX-7
    WCS_EX-0_PROGRAMMED.MCX-7
    WEDGE WITH ARC.MCX-7
    XFORM PRACTICE.MCX-7

    878 downloads

    Submitted

  5. Free

    These files are intended for those who have purchased the Mastercam X7 Handbook Volume 2, available here.
     
    Files included:
     
    Extras:

    Clark-Y.txt
    HOUSING COVER.IGS
    NC Program Planning Sheet.doc
    QUIZ_CHAPTER 6_HIGH SPEED POCKET.MCX-7
    quiz_chapter-4_airfoil.csv
    quiz_chapter-4_airfoil.txt

     
     
    MCX files:

    2BLADEPROP.MCX-7
    2SURFBLEND.MCX-7
    3DSPLINEEXERCISE.MCX-7
    3FILLETBLEND.MCX-7
    3SURFBLEND.MCX-7
    AREACLEARANCE.MCX-7
    CELLPHONE_CH3-QUIZ.MCX-7
    CELLPHONE_REMOVEBNDY.MCX-7
    CONTOURFINISH.MCX-7
    CONTOURROUGH.MCX-7
    COREROUGHING.MCX-7
    DRAFTSURF.MCX-7
    EXTENDTOEDGE.MCX-7
    EXTRUDEDSURF.MCX-7
    FENCESURF.MCX-7
    FENCESURF1.MCX-7
    FENCESURF3.MCX-7
    FENCESURF4.MCX-7
    FILLET SURFACE.MCX-7
    FILLETTOCURVE.MCX-7
    FILLETTOPLANE.MCX-7
    FILLHOLES.MCX-7
    FINISHSCALLOP.MCX-7
    FLATSURF1.MCX-7
    FLOWLINE.MCX-7
    GUSSETPLATE.MCX-7
    HORIZONTAL.MCX-7
    HSTRADIAL.MCX-7
    HST-SCALLOP.MCX-7
    HSTSPIRAL.MCX-7
    LEFTOVER.MCX-7
    LOFTWING.MCX-7
    NETSURF3.MCX-7
    NETSURF5.MCX-7
    NETSURF6.MCX-7
    NETSURF7.MCX-7
    NETSURF9.MCX-7
    NOSEPUCK.MCX-7
    PARALLELROUGH.MCX-7
    PARALLELSTEEP.MCX-7
    PENCILPART.MCX-7
    PENCILSEAMS.MCX-7
    PROJECTBLEND.MCX-7
    PROJECTLETTERS.MCX-7
    RADIAL.MCX-7
    RASTER.MCX-7
    REMOVEBNDY.MCX-7
    RESTMILL.MCX-7
    REVOLVECORNER.MCX-7
    REVOLVESURF.MCX-7
    ROUGHPLUNGE.MCX-7
    ROUGHPOCK.MCX-7
    ROUGHPROJCURVES.MCX-7
    ROUGHPROJNCI.MCX-7
    ROUGHPROJPTS.MCX-7
    RULED-1.MCX-7
    RULETOPOINT.MCX-7
    SHALLOW.MCX-7
    SHALLOWFINISH.MCX-7
    SKATEBOARD.MCX-7
    SPLINE EXERCISES.MCX-7
    SPLITMODEL.MCX-7
    SPLITSURF.MCX-7
    STEEPSHALLOW.MCX-7
    SWEPT1-1.MCX-7
    SWEPT2-1.MCX-7
    SWEPTMANY.MCX-7
    TRANSLATE3D.MCX-7
    TRIM SURFACE TO SURFACES.MCX-7
    TRIM_SURFTOPLANE.MCX-7
    TRIMSURF1.MCX-7
    TRIMTOCURVES_NORMAL.MCX-7
    TRIMTOCURVES_PLANE.MCX-7
    UNTRIM.MCX-7
    WATERLINE.MCX-7

    872 downloads

    Submitted

  6. Free

    These files are intended for those who have purchased the Mastercam X7 Mill level 1 Professional Courseware
     
    Machining Exercise files:
     
    2DPOCKET.MCX-7
    CHAMFERPART2D.MCX-7
    CIRCMILL.MCX-7
    CONTOUR ONEWAY.MCX-7
    CONTOUR.MCX-7
    DRAWING1.MCX-7
    DRAWING18.MCX-7
    DRAWING20.MCX-7
    DRAWING3.MCX-7
    DRAWING4.MCX-7
    DYNAMIC_HS_TOOLPATHS.MCX-7
    FACE.MCX-7
    FBM_EXERCISE.MCX-7
    HIGH SPEED EXERCISE.MCX-7
    HIGH SPEED SOLID.MCX-7
    HIGH SPEED SOLID.SLDPRT
    OPEN POCKET.MCX-7
    PEEL MILLING.MCX-7
    SOLID DRAWING2.MCX-7
    WIREFRAME_RULED.MCX-7
    WIREFRAME_SWEPT.MCX-7
     
    Training Exercise files:
     
    2DPOCKET.MCX-7
    CHAMFERPART2D.MCX-7
    CIRCMILL.MCX-7
    CONTOUR ONEWAY.MCX-7
    CONTOUR.MCX-7
    DRAWING1.MCX-7
    DRAWING18.MCX-7
    DRAWING20.MCX-7
    DRAWING3.MCX-7
    DRAWING4.MCX-7
    DYNAMIC_HS_TOOLPATHS.MCX-7
    FACE.MCX-7
    FBM_EXERCISE.MCX-7
    HIGH SPEED EXERCISE.MCX-7
    HIGH SPEED SOLID.MCX-7
    HIGH SPEED SOLID.SLDPRT
    OPEN POCKET.MCX-7
    PEEL MILLING.MCX-7
    SOLID DRAWING2.MCX-7
    WIREFRAME_RULED.MCX-7
    WIREFRAME_SWEPT.MCX-7

    564 downloads

    Updated

  7. Free

    These files are intended for those who have purchased the Mastercam X7 Multiaxis Professional Courseware, available here.
     
    Files included:
     
    4 - AXIS ROTARY TOOLPATH - AXIAL DAMPENING.MCX-7
    4 - AXIS ROTARY TOOLPATH.MCX-7
    4AXIS INDEX_A AXIS.MCX-7
    5AX_ENGRAVING.MCX-7
    AREA SETTINGS.MCX-7
    AXIS SUBSTITUTION - CREATING A CONICAL HELIX DRAWING.MCX-7
    AXIS SUBSTITUTION - CREATING A CONICAL HELIX.MCX-7
    AXIS SUBSTITUTION - CREATING A CYLINDRICAL HELIX DRAWING.MCX-7
    AXIS SUBSTITUTION - CREATING A CYLINDRICAL HELIX.MCX-7
    AXIS SUBSTITUTION - ROLL THE GEOMETRY.MCX-7
    AXIS SUBSTITUTION - ROTARY AXIS POSITIONING & TRANSFORM.MCX-7
    AXIS SUBSTITUTION - UNROLL THE GEOMETRY.MCX-7
    BARRELCAM DRAWING.MCX-7
    BARRELCAM.MCX-7
    CAMSHAFT.MCX-7
    CURVE 5 AXIS CURVE TYPE 3D CURVES.MCX-7
    CURVE 5 AXIS OUTPUT FORMAT.MCX-7
    CURVE 5 AXIS REVIEW FILE.MCX-7
    CURVE 5 AXIS TIP CONTROL.MCX-7
    CURVE 5 AXIS TOOL AXIS CONTROL CHAIN.MCX-7
    CURVE 5 AXIS TOOL AXIS CONTROL FROM POINT.MCX-7
    CURVE 5 AXIS TOOL AXIS CONTROL LINES.MCX-7
    CURVE 5 AXIS TOOL AXIS CONTROL PLANE.MCX-7
    CURVE 5 AXIS TOOL AXIS CONTROL TO POINT.MCX-7
    CURVE TYPE SURFACE EDGE ALL.MCX-7
    CURVE TYPE SURFACE EDGE ONE.MCX-7
    CURVE5 AXIS PROJECTION NORMAL TO SURFACE.MCX-7
    CUT PATTERN 1- COLLISION CONTROL.MCX-7
    CUT PATTERN 1.MCX-7
    DRILL ENTITY POINTS.MCX-7
    DRILL POINT _LINES TIP CONTROL ORIGINAL POINT.MCX-7
    DRILL TOOL AXIS CONTROL PLANE.MCX-7
    FLOW 5X-AXIS LIMITS.MCX-7
    GOUGE CHECK.MCX-7
    IMPELLER WITH TILTED CURVE.MCX-7
    IMPELLER WITHOUT TILT CURVE.MCX-7
    MOLD BOTTLE.MCX-7
    MSURF CUT PATTERN SURFACE.MCX-7
    PORT 5 AXIS.MCX-7
    SORTING AND LINKING.MCX-7
    SWARF 5 AXIS WALLS CHAINS.MCX-7
    SWARF OUTPUT FORMAT 4 AXIS.MCX-7
    SWARF OUTPUT FORMAT 5AXIS.MCX-7
    SWARF TIP CONTROL LOWER RAIL.MCX-7
    TOMBSTONE.MCX-7
    TOOL AXIS CONTROL SIDE TILT.MCX-7
    TURBINE BLADE.MCX-7
    WORM GEAR .MCX-7

    544 downloads

    Updated

  8. Free

    These files are intended for those who have purchased the Mastercam X7 Mill level 3 Professional Courseware
     
     
    Geometry training exercise files:
     
    2 SURFACE BLEND.MCX-7
    3 SURFACE BLEND.MCX-7
    CPLANE-NORMAL.MCX-7
    CPLANES ENTITY - ROTATE.MCX-7
    CUBE.MCX-7
    CURVES.MCX-7
    DRAFT_EXTRUDED.MCX-7
    DYNAMIC PLANE.MCX-7
    FENCESURFACE.MCX-7
    FILLET_BLEND.MCX-7
    HAIRDRYER.MCX-7
    NETSURF1.MCX-7
    NETSURF3.MCX-7
    NETSURF4.MCX-7
    NETSURF5.MCX-7
    PRIMITIVES.MCX-7
    RUL2.MCX-7
    RULED-SYNC.MCX-7
    SURFACE_FILLET.MCX-7
    SURFACING_1.MCX-7
    SURFACING_11.MCX-7
    SURFACING_12.MCX-7
    SURFACING_2.MCX-7
    SURFACING_3.MCX-7
    SURFACING_4.MCX-7
    SURFACING_5.MCX-7
    SURFACING_6.MCX-7
    SURFACING_7.MCX-7
    SURFACING_8.MCX-7
    SURFACING_9.MCX-7
    SWEPT1.MCX-7
    SWEPT2.MCX-7
    SWEPT3.MCX-7
    SWEPT4.MCX-7
    TEA POT.MCX-7
    TRIM SURF TO SURF.MCX-7
    TRIM TO CURVES.MCX-7
     
     
    Toolpath training exercise files:
     
    HS AREA_REST ROUGHING_HYBRID.MCX-7
    HST OPTIAREA AND OPTIREST.MCX-7
    HST OPTICORE AND WATERLINE.MCX-7
    HST RADIAL SPIRAL.MCX-7
    HST-OPTICORE_HORIZONTAL.MCX-7
    ROUGH POCKET V HS CORE.MCX-7
    ROUGH POCKET_ FINISH FLOWLINE.MCX-7
    SURFACE PLUNGE PARALLEL AND PENCIL .MCX-7
    SURFACE POCKET CONTOUR AND SCALLOP.MCX-7
    SURFACE RESTMILL STL.MCX-7

    661 downloads

    Updated

  9. Free

    This file is intended for those who have purchased the Mastercam X7 Lathe Training Tutorial, available here.
     
    TUTORIAL#9.SLDPRT

    507 downloads

    Updated

  10. Free

    This file is intended for those who have purchased the Mastercam X7 Solids Training Tutorial, available here.

    253 downloads

    Updated

  11. Free

    This file is intended for those who have purchased the Mastercam X7 Lathe Training Tutorial Metric, available here.
     
     
    TUTORIAL#9 Metric.SLDPRT

    142 downloads

    Updated

  12. Free

    These files are intended for those who have purchased the Mastercam X7 Solids Training Tutorial Metric, available here.
     
    Files included:
     
    SOLIDS_06.MCX-7
    TUTORIAL #6 EXERCISE.MCX-7

    178 downloads

    Updated

  13. Free

    This file is intended for those who have purchased the Mastercam X7 Mill level 1 Training Tutorial, available here.
     
    Included files:
     
     
    Tutorial #8.SLDPRT
    Tutorial #8 Exercise #1.SLDPRT
    TUTORIAL#10.MCX-7
    TUTORIAL #10 EXERCISE.MCX-7

    1,191 downloads

    Updated

  14. Free

    These files are intended for those who have purchased the Mastercam X7 Mill level 1 Training Tutorial Metric, available here.
     
    Files included:
     
    Tutorial #8.SLDPRT
    Tutorial #8 Exercise #1.SLDPRT
    TUTORIAL#10.MCX-7
    TUTORIAL #10 EXERCISE.MCX-7

    246 downloads

    Updated

  15. Free

    This file is intended for those who have purchased the Mastercam X7 Router Training Tutorial, available here.
     
    Included files:
     
     
    TUTORIAL #8.MCX-7
    Tutorial_06.jpg

    233 downloads

    Submitted

  16. Free

    This file is intended for those who have purchased the Mastercam X7 Router Training Tutorial Metric, available here.
     
    Included files:
     
     
    TUTORIAL 8 - METRIC.MCX-7
    Tutorial_06 - metric.jpg

    153 downloads

    Submitted

  17. Free

    This file is intended for those who have purchased the Mastercam X7 Mill level 3 Training Tutorial, available here.
     
    Included files:
     
    TUTORIAL #6 EXERCISE.MCX-7
    TUTORIAL #6 Wireframe.MCX-7
    TUTORIAL #7 EXERCISE.MCX-7
    TUTORIAL #7 WIREFRAME.MCX-7

    723 downloads

    Updated

  18. Free

    This file is intended for those who have purchased the Mastercam X7 Mill level 3 Training Tutorial, available here.
     
    Included files:
     
    TUTORIAL #6 EXERCISE.MCX-7
    TUTORIAL #6 WIREFRAME.MCX-7
    TUTORIAL #7 EXERCISE.MCX-7
    TUTORIAL #7 WIREFRAME.MCX-7

    240 downloads

    Updated

  19. Free

    This file is intended for those who have purchased the Mastercam X7 Indexing Training Tutorial, available here.
     
    Included files:
     
    TOMBSTONE.MCX-7
    TOMBSTONE_PART.MCX-7

    320 downloads

    Submitted

  20. Free

    This file is intended for those who have purchased the Mastercam X7 Indexing Training Tutorial Metric, available here.
     
    Included files:
     
    TOMBSTONE.MCX-7
    TOMBSTONE_PART.MCX-7

    168 downloads

    Submitted

  21. Free

    These files are intended for those who have purchased the Mastercam X7 Advanced Multiaxis Training Tutorial, available here.
     
    Included files:
    TUTORIAL 1 PROJECT5 AXIS.MCX-7
    TUTORIAL 2 SWARF.MCX-7
    TUTORIAL 3 FINISH BLADE SURFACES.MCX-7
    TUTORIAL 4 IMPELLER WITHOUT TILT CURVE.MCX-7
    TUTORIAL 5 COLLISION CONTROL STRATEGIES.MCX-7

    1,287 downloads

    Submitted

  22. Free

    These are intended for those who have purchased the Mastercam X7 Advanced Multiaxis Training Tutorial (Metric), available here.
     
    Files included:
    TUTORIAL 1 PROJECT5 AXIS _METRIC.MCX-7
    TUTORIAL 2 SWARF_METRIC.MCX-7
    TUTORIAL 3 FINISH BLADE SURFACES_METRIC.MCX-7
    TUTORIAL 4 IMPELLER WITHOUT TILT CURVE_METRIC_TEST.MCX-7
    TUTORIAL 5 COLLISION CONTROL STRATEGIES_METRIC.MCX-7

    666 downloads

    Submitted

  23. Free

    These files are intended for those who have purchased the Mastercam X7 Design Training Tutorial, available here.
     
    Included files:
    DATUM.MCX-7
    TUTORIAL #10 - EXERCISE-INCH.MCX-7
    TUTORIAL #10 - INCH.MCX-7

    708 downloads

    Updated

  24. Free

    These files are intended for those who have purchased the Mastercam X7 Art Training Tutorial, available here.
     
    Included files:
    TUTORIAL #3 WIREFRAME.zip
    TUTORIAL_04.jpg

    680 downloads

    Submitted

  25. Free

    These files are intended for those who have purchased the Mastercam X7 Design Training Tutorial (Metric), available here.
     
    Included files:
    TUTORIAL #10 - METRIC.MCX-7
    TUTORIAL #10 - METRIC _EXERCISE.MCX-7

    292 downloads

    Submitted

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us