These files are intended for those who have purchased the Mastercam X2 4/5 Axis Professional Courseware, available in print form here.

The following files are included in the .zip file:

• 13_IMPELLER_BLADE_FINISHING.MCX
• 5AX_ENGRAVING.MCX
• CURVE 5 AX SURFACE EDGE ONE MULTIPLE SURFACES1.MCX
• CURVE 5 AXIS CURVE TYPE 3D CURVES.MCX
• CURVE 5 AXIS OUTPUT FORMAT.MCX
• CURVE 5 AXIS REVIEW FILE.MCX
• CURVE 5 AXIS TIP CONTROL.MCX
• CURVE 5 AXIS TOOL AXIS CONTROL CHAIN.MCX
• CURVE 5 AXIS TOOL AXIS CONTROL FROM POINT.MCX
• CURVE 5 AXIS TOOL AXIS CONTROL LINES.MCX
• CURVE 5 AXIS TOOL AXIS CONTROL PLANE.MCX
• CURVE 5 AXIS TOOL AXIS CONTROL TO POINT.MCX
• CURVE TYPE SURFACE EDGE ALL.MCX
• CURVE TYPE SURFACE EDGE ONE.MCX
• CURVE5 AXIS PROJECTION NORMAL TO SURFACE.MCX
• DRAWING 1.MCX
• DRAWING 2.MCX
• DRAWING 3.MCX
• DRAWING 6.MCX
• DRILL ENTITY TYPE POINTS_LINES.MCX
• DRILL OUTPUT FORMAT.MCX
• DRILL TIP CONTROL ORIGINAL POINT.MCX
• DRILL TIP CONTROL PROJECTED POINT.MCX
• DRILL TIP CONTROL SURFACE.MCX
• DRILL TOOL AXIS CONTROL PLANE.MCX
• ENTRY EXIT.MCX
• FILTER.MCX
• GOUGE CHECK STRATEGIES TOOLPATHS.MCX
• INDEXING ABOUT A AXIS.MCX
• MOLD BOTTLE_TOOLPATH.MCX
• PORT 5 AXIS.MCX
• ROTARY4AXIS_AXIS DAMPENING.MCX
• SWARF 5 AXIS WALLS CHAINS.MCX
• SWARF OUTPUT FORMAT 4 AXIS.MCX
• SWARF OUTPUT FORMAT 5AXIS.MCX
• TOMBSTONE.MCX
• TURBINE BLADE_TOOLPATH.MCX
• WORM GEAR.MCX