These files are intended for those who have purchased the Mastercam X5 Handbook Volume 3, available in print form here and eBook form here.

Files included are:

MCX-5 Files:

• 5X_TEST_PIVOT LOCATION.MCX-5
• AEROSPACE.MCX-5
• AIRFOIL FLOW 5 AXIS.MCX-5
• AREA TYPE.MCX-5
• COLLISION CONTROL SET TO TILTING TOOL AWAY WITH MAX ANGLE.MCX-5
• CURVE 5 AXIS CURVE TYPE 3D CURVES.MCX-5
• CURVE 5 AXIS TOOL AXIS CONTROL CHAINS.MCX-5
• CURVE 5 AXIS TOOL AXIS CONTROL FROM POINT.MCX-5
• CURVE 5 AXIS TOOL AXIS CONTROL LINES.MCX-5
• CURVE 5 AXIS TOOL AXIS CONTROL PLANE.MCX-5
• CURVE 5 AXIS TOOL AXIS CONTROL SURFACE.MCX-5
• CURVE 5 AXIS TOOL AXIS CONTROL TO POINT.MCX-5
• CURVE 5AX SURFACE EDGE ONE MULTIPLE SURFACES2.MCX-5
• CURVE PROJECT NORMAL_PLANE.MCX-5
• CURVE PROJECT NORMAL_SURFACE.MCX-5
• CURVE TYPE SURFACE EDGE ALL.MCX-5
• CURVE TYPE SURFACE EDGE ALL-WITH SEAM.MCX-5
• CURVE TYPE SURFACE EDGE ONE.MCX-5
• CURVE5AX_SPLIT TRIMMED SURFACE.MCX-5
• Custom application BLADE ROOT MACHINING.MCX-5
• CUSTOM APPLICATION CAVITY TILT CURVE.MCX-5
• CUSTOM APPLICATION ELECTRODE.MCX-5
• CUSTOM APPLICATION IMPELLER BLADE.MCX-5
• CUSTOM APPLICATION IMPELLER FLOOR.MCX-5
• CUSTOM APPLICATION PORT EXPERT.MCX-5
• CUSTOM APPLICATION PROJECTION.MCX-5
• CUSTOM APPLICATION SWARF MILLING.MCX-5
• CUT PATTERN BOX.MCX-5
• CUT PATTERN CYLNDER.MCX-5
• CUT PATTERN SPHERE.MCX
• CUT PATTERN SURFACE.MCX-5
• CUT TOLERANCE.MCX-5
• CUTS ALONG CURVE.MCX-5
• DRILL 5 AXIS EXAMPLE.MCX-5
• DRILL ENTITY TYPE POINTS_LINES.MCX-5
• DRILL OUTPUT FORMA.MCX-5
• DRILL TIP CONTROL ORIGINAL POINT.MCX-5
• DRILL TIP CONTROL PROJECTED POINT.MCX-5
• DRILL TOOL AXIS CONTROL PLANE.MCX-5
• ENTRY EXIT.MCX-5
• FILTER.MCX-5
• FLOW TOOL AXIS CONTROL BOUNDARY.MCX-5
• FLOW TOOL AXIS CONTROL CHAIN.MCX-5
• FLOW TOOL AXIS CONTROL LINES.MCX-5
• FLOW TOOL AXIS CONTROL SURFACE.MCX-5
• FLOW TOOL AXIS CONTROL TO AND FROM POINTS.MCX-5
• GAP SETTINGS.MCX-5
• IMPELLER.MCX-5
• IMPELLER_2.MCX-5
• LASER TRIM CUT.MCX-5
• MESH TOOLPATHS.MCX-5
• MOPH BETWEEN 2 CURVE PATTERN.MCX-5
• MORPH BETWEEN 2 SURFACE GEOMETRY SELECTION.MCX-5
• OUTPUT FORMAT.MCX-5
• PARALLE CUTS.MCX-5
• PARALLEL TO SURFACE.MCX-5
• PORT ADD EXIT BLEND.MCX-5
• PORT MACHINING.MCX-5
• PORT TOOL AXIS CONTROL_CHAIN GEOMETRY.MCX-5
• PORT.MCX-5
• PROJECT CURVES.MCX-5
• RIB CUT.MCX-5
• RIB CUT.X_T
• ROTARY 4 AXIS AXIAL CUT.MCX-5
• ROTARY 4 AXIS AXIAL DAMPENING LENGTH.MCX-5
• ROTARY 4 AXIS NORMAL TO SURFACE.MCX-5
• ROTARY 4 AXS THROUGH A POINT.MCX-5
• SIDE TILT DEFINITIONS.MCX-5
• SWARF 4-AXIS.MCX-5
• SWARF 5 AXIS WALLS CHAINS.MCX-5
• SWARF 5-AXIS_RAILS-AEROSPACE PART.MCX-5
• SWARF OUTPUT FORMAT 4 AXIS HORIZONTAL.MCX-5
• SWARF OUTPUT FORMAT 5AXIS.MCX-5
• SWARF TIP CONTROL LOWER RAIL.MCX-5
• TILTING STRATEGIES.MCX-5
• TOOL AXIS CONTROL -RELITIVE TO DIRECTION-1 LINE.MCX-5
• TOOL AXIS CONTROL SURFACE.MCX-5
• TURBO_IMPELLER.MCX-5
• Z AXIS LIMITS.MCX-5