About Haas VF-TR 5X Mill Clamp

[opcode]

Hello,Everybody, 

Use the Multiaxis  morph toolpath to create 3 axis toolpath for 4 planes, I found it was wrong Clamp code when  the tool plane was changed , How to output the right  Clamp code? Thanks!

G0 G28 G91 Z0.
(12 BALL|TOOL - 1|DIA. OFF. - 1|LEN. - 1| DIA. - 12.)
M11       <<<<<<<<
M13       <<<<<<<<
T1 M6
G0 G54 G90 X-17.471 Y-150. B-90. A90. S1000 M3
G43 H1 Z69.528
Y-40.391
Z59.528
G1 Z49.528 F600.
X-17.47 Y-23.588 Z49.537 F120.
X-17.34 Y-60.473 Z49.757
X-17.432 Y-59.829 Z49.673
X-17.466 Y-59.198 Z49.587
X-17.471 Y-57.195 Z49.529
Y-40.391 Z49.528
Z59.528 F1200.
G0 Z69.528
Y-150.
<<<<<<<<<<
B0.
<<<<<<<<<
Y-40.391
Z59.528
G1 Z49.528 F600.

 

T000.mcam

[crazy^millman]

On 12/25/2019 at 7:33 AM, opcode said:

Hello,Everybody, 

Use the Multiaxis  morph toolpath to create 3 axis toolpath for 4 planes, I found it was wrong Clamp code when  the tool plane was changed , How to output the right  Clamp code? Thanks!

G0 G28 G91 Z0.
(12 BALL|TOOL - 1|DIA. OFF. - 1|LEN. - 1| DIA. - 12.)
M11       <<<<<<<<
M13       <<<<<<<<
T1 M6
G0 G54 G90 X-17.471 Y-150. B-90. A90. S1000 M3
G43 H1 Z69.528
Y-40.391
Z59.528
G1 Z49.528 F600.
X-17.47 Y-23.588 Z49.537 F120.
X-17.34 Y-60.473 Z49.757
X-17.432 Y-59.829 Z49.673
X-17.466 Y-59.198 Z49.587
X-17.471 Y-57.195 Z49.529
Y-40.391 Z49.528
Z59.528 F1200.
G0 Z69.528
Y-150.
<<<<<<<<<<
B0.
<<<<<<<<<
Y-40.391
Z59.528
G1 Z49.528 F600.

 

T000.mcam

Change it in the post. Get a hold of your dealer and have them email CNC Software post department and they will get the post corrected.

Might think about using a Cylinder in your linking. Will be a much better toolpath. I would also Swarf that surface not Morph between 2 curves since you have a trunnion machine you can machine that wall that way.