Backplot VCR bar above the graphics window

[Threept82]

Good Morning all,

We had a computer guy come in to speed up my new windows 10 system because it seemed slower then my older system.

Now the backplot VCR bar above the graphics window comes on then the buttons on the left and the slide bar disappear. 

If I run my mouse over the buttons they reappear but disappear once the mouse is no longer over them.

The computer guy updated the graphics card and that's when all went bad and he cant figure out what went wrong.

He then reverted the driver back to before the update but still the same.

This is with MasterCam 2019, So we loaded MasterCam 2020 and It works fine.

Now for my question; Is there a way to compare the MasterCam graphics settings between 2019 and 2020?

Thanks

 

[Chally72]

First step- is 2019 still set to use the dedicated graphics card and not the integrated graphics? You must force use of the dedicated graphics card for the Mastercam .exe in the Nvidia (or other) control panel. Your IT guy should know how to do this if you're unsure of how to verify.

[Threept82]

I wasn't sure so I looked and found both 2019 and 2020 on the control panel.

Changed the 2019 settings to match 2020 and all looks good.

Your question gave me the answer.

Thank You.