Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Okuma LB3000 EXII Barfeed Program for LNS QLS 80 S2


Titanium
 Share

Recommended Posts

CALL OCHK
M5
M9
G0 X20. Z20.
T020202 Y0
IF [VDIN [24]EQ 1]NLOAD
M84
G0 X1.75 Z2.
G0 Z.015
M93
M83
M00 (***CHEK FOR PART TO PART STOP***)
G0 Z2.
G0 X20 Z20
M01
GOTO NPART
NLOAD
M77
M84
M93
M76
G4 F8.
G0 X1.75 Z2
G0 Z.05
M93
M83
G0 Z2
G0 X20 Z20
M01
GOTO NPART
NPART
G00 X20 Z20
G50 S1500
CALL OCHK

I've been too lazy to clean this up because it works and was before my time. The M93 is the push signal, so it's probably going to be different on your control. The vdin[24] is for ejecting the stub/bar changes.

  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...