Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Mazak operators and post


Recommended Posts

7 minutes ago, Grimes said:

gotta be for every feedrate though, do your mazaks run a G1 in ipm?

No..myself, I'd never set up that way, though I know people who have.....

Used to output as a variable and set the variable value at the top of each tool change

  • Like 1
Link to comment
Share on other sites
On 1/31/2020 at 4:11 PM, Grimes said:

gotta be for every feedrate though, do your mazaks run a G1 in ipm? i think all of ours run fpr on all feed rates. so if i use like 50 ipm on the plunge, then a 10 ipm feed thats a lot of changes and a pita, i use find and replace in ncplot. but still a bit more work. if it cant be done it cant be done, havent been on that machine i a week so it hasnt been a problem. thanks all as always.

My previous just change the feedrate format to ipr in tapping only.

The rest is in ipm.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...