Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

2019 - 2020 Verify issue


Recommended Posts

Hello All,

I am hoping someone can help or at least explain why.

I programmed a part with 2020, 1st tool up is a 3/8 end mill that I am peel milling with.

looks good. when part is done I run it thru verify picking the target model to cut.

As soon as the tool touches the part it stops with -A collision occurred error.

I did the same thing using 2019 and it cuts with no issues.

?

Thanks

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...