Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Wondering why the post processor adds this


Recommended Posts

I am wondering if anyone knows why this is happening, when I post process the Gcode for my toolpaths it adds M05 , G91 G28 Z3. , M01 after every operation when I do not tell it to raise the Z 3. inches anywhere in the settings. Wondering what is causing it to do that it is a nested sheet with 100 parts nested..Thanks in advance to whoever responds.

settings1.jpg

settings2.jpg

Link to comment
Share on other sites
On 2/26/2020 at 3:44 PM, k_lav said:

I am unable to upload the file as it is from the company I work for.

Could you create a quick generic sample file that doesn't share any proprietary data and does the same thing in the output code?  This is normally what I do because my files tend to be 500MB or larger.  No point in going through the hassle of sharing the file when a 1MB sample will do the trick.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...