Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Anyone have Mastercam Art, And some "free time"


Roger
 Share

Recommended Posts

If anyone has Mastercam Art, and is willing to help me make the attached Mastercam file into an emblem that really POP's, stand's out, look's cool, etc.  It needs to stay close to the size it is as a solid.  It can be a little thicker if needed.

I would appreciate it.  Thank's!

MAG 7 LOGO.mcam

Link to comment
Share on other sites
1 hour ago, Roger said:

If anyone has Mastercam Art, and is willing to help me make the attached Mastercam file into an emblem that really POP's, stand's out, look's cool, etc.  It needs to stay close to the size it is as a solid.  It can be a little thicker if needed.

I would appreciate it.  Thank's!

MAG 7 LOGO.mcam

you dont have to use art on this, art is very powerful and can produce really intricate cool looking toolpaths but in this case since you already have geometry i would just use the engrave toolpath, see example attached. 

sample file https://fastechincorporated-my.sharepoint.com/:u:/g/personal/support_fastechinc_net/ESC3bilIHpRJmvN85rMVsfMB0LM1gpbLWi2iFrJBburotA?e=aDUwyB

results

2222.png

the final depth, stepover, etc. can be adjusted to fit your needs but i think this engrave path will look good. 

  • Like 2
Link to comment
Share on other sites

FANTASTIC!  All these years I've never used engraving.............I was trying to make it look good using a flat endmill, and contour/pocket toolpaths, and with all those sharp edges wasn't having much luck.

Thanks for taking the time!!!!!!

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...