Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Forced outputs at EVERY toolpath linked to Mics Value


Recommended Posts

Hello,

I need the info below to force out for all toolpaths so I can use GOTO and jump over toolpaths. I also want the "extra" info linked to a misc value so I can turn off the "extra" info when not needed.

 

INFO I NEED

G00 G90 G54.1 P1 X.0197 Y-.0525 S4500 M03 T7
G43 H6 Z1. M07

 

THIS IS A REGULAR TOOL CHANGE.

N1
(ROUGH ID.150 DEEP- 7-9MM- SIDE 1)
(A0. B0. POS 2)
G00 G17 G40 G49 G80 G90
G00 G91 G28 Z0.
G00 G90 G53 X4.0
T6 (1/4" ENDMILL, 4FL, .750 LOC)
M06
G00 G90 G54.1 P1 X.0197 Y-.0525 S4500 M03 T7
G43 H6 Z1. M07
Z.25
G94 G01 Z0. F150.


 

 

 

 

Link to comment
Share on other sites
2 hours ago, Dave228 said:

Hello,

I need the info below to force out for all toolpaths so I can use GOTO and jump over toolpaths. I also want the "extra" info linked to a misc value so I can turn off the "extra" info when not needed.

 

INFO I NEED

G00 G90 G54.1 P1 X.0197 Y-.0525 S4500 M03 T7
G43 H6 Z1. M07

 

THIS IS A REGULAR TOOL CHANGE.

N1
(ROUGH ID.150 DEEP- 7-9MM- SIDE 1)
(A0. B0. POS 2)
G00 G17 G40 G49 G80 G90
G00 G91 G28 Z0.
G00 G90 G53 X4.0
T6 (1/4" ENDMILL, 4FL, .750 LOC)
M06
G00 G90 G54.1 P1 X.0197 Y-.0525 S4500 M03 T7
G43 H6 Z1. M07
Z.25
G94 G01 Z0. F150.


 

 

 

 

That will be controlled at the null tool change and will have write logic in the post to look for whatever mr or mi trigger you use to help you decided to output or not output information.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...