Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Can't get solids from surfaces to work (2019)


SlaveCam
 Share

Recommended Posts

The success of that functionality depends on several factors regarding the surface model.

  • Are there any open edges where a surface does not share an edge with a neighboring surface?
  • Does the Analyze "Test Surfaces" show any problems?
  • Are there very thin surfaces in the model that might be so thin that its neighbors think that they share an edge?
Link to comment
Share on other sites

Hello and thank you for your response.

The key was to set edge tolerance as high as 0.1 (mm). By setting edge tolerance to 0.01, Mastercam goes haywire (as if the operation never finished properly) and zooming in/out I get "tessellating..." message. Surfaces had no errors.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...