Good video from the tech exchange

[gcode]

 

 

[#Rekd™]

I have been following that entire series on Youtube!

lots of great programming tips in that video! 

[gcode]

A new one out this morning

 

[jeff]

For someone that is basically all self-taught (aside from the massive help on here) the Auto-tilt video helped me out a lot.

[Chally72]

You'll be seeing a steady stream of these throughout the year- glad they're of use!

[gcode]

 

[OVodov]

Many years ago I used learn Solidcam with their channel on youtube and it was amazing.

Thank when I switched to Mastercam it was nightmare. The only available channel was made by one vietnamese guy which was hard to understand sometimes.

Now I amazed by all these video and examples on Tech Exchange you sharing. Please don't stop

 

 

[gcode]

If you have an account on Mastercam.com you can get them right from the source

There are over 100 available now

https://community.mastercam.com/techexchange#files

 

[Chally72]

The stuff on the Tech Exchange is what we actually cut the parts with in the manufacturing lab, in most cases. The exact tools, feeds/speeds/fixturing that produced the parts you download and see in the videos.

 

If anyone browses through, there's also some very cool examples of things that go underutilized in the software, like using axis substitution in a 2D Dynamic path to cut a variable pitch screw on a 4 axis machine without a multiaxis license:

 

https://community.mastercam.com/TechExchange/Parts/19#partTitle

 

[OVodov]

Tech Exchange examples helped me to learn Mastercam. I downloaded all of them for milling.

[gcode]