pp Mastercam CycleTime

[xxedraxx]

CycleTime for Mastercam

with the help of chook

here is my example of cycle time for an Okuma LT lathe

 

OS1
 
 ( Werkzeugtabelle    TOTAL CYCLE TIME 04:19  )
 
(N03  >> T0303 R0.8 G96 S50  F.100 M4 |00:48| WZ-16P-D20-IN-VOR-R0.8 )
(N02  >> T0202 R0.8 G96 S250 F.170 M4 |00:30| WZ-2-L R0.8-RS )
(     >> T0202 R0.8 G96 S50  F.100 M4 |     | WZ-2-L R0.8-RS )
(     >> T0202 R0.8 G96 S250 F.220 M4 |     | WZ-2-L R0.8-RS )
(     >> T0202 R0.8 G96 S250 F.250 M4 |     | WZ-2-L R0.8-RS )
(N04  >> T0404 R0.4 G96 S280 F.080 M4 |00:20| W24-W5-R0.4-L-A-STECHEN )
(N10  >> T1010 R0.4 G96 S50  F.070 M4 |00:14| WZ9-D21-IN-VOR-KONTUR-R0.4 )
(N05  >> T0505 R0.4 G96 S50  F.100 M4 |00:36| WZ67-D20-MINU S20 GRAD-R0.4-SR )
(     >> T0505 R0.4 G96 S50  F.050 M4 |     | WZ67-D20-MINU S20 GRAD-R0.4-SR )
(N06  >> T0606 R0.4 G96 S200 F.120 M4 |00:32| WZ-102_R0.4-SL )
(N08  >> T0808 R0.8 G96 S250 F.200 M4 |00:08| WZ-3-L-A-SCHLICHTEN-R0.8 )
(N09  >> T0909 R0.4 G96 S130 F.050 M4 |00:18| WZ67-D19-MINUS20-GRAD-R0.4 )
(N11  >> T1111 R0.4 G96 S130 F.100 M4 |00:04| WZ-19-80-D20-L-R0.4 )
(N092 >> T0909 R0.4 G96 S130 F.050 M4 |     | WZ67-D19-MINUS20-GRAD-R0.4 )
(N15  >> T1515 R0.0 G97 S3183F510. M3 |00:49| 16 SCHAFTFRÄSER )

 
G0 X600 Z600
G50 S2500
 
N03
 
 ( Werkzeug -- WZ-16P-D20-IN-VOR-R0.8 )
 ( Halter   -- S10M-SCLCL 06 )
 ( Platte   -- CCMT 09 T3 08-MM )
 
 ( Innen Schruppen Kontur Anschluss )
 
G0 X600 Z600
T0303
VLMON[VETLN]=3
G97 S796 M63 M04

...

...

 

CycleTime.zip

[crazy^millman]

16 hours ago, xxedraxx said:

CycleTime for Mastercam

with the help of chook

here is my example of cycle time for an Okuma LT lathe

 

OS1
 
 ( Werkzeugtabelle    TOTAL CYCLE TIME 04:19  )
 
(N03  >> T0303 R0.8 G96 S50  F.100 M4 |00:48| WZ-16P-D20-IN-VOR-R0.8 )
(N02  >> T0202 R0.8 G96 S250 F.170 M4 |00:30| WZ-2-L R0.8-RS )
(     >> T0202 R0.8 G96 S50  F.100 M4 |     | WZ-2-L R0.8-RS )
(     >> T0202 R0.8 G96 S250 F.220 M4 |     | WZ-2-L R0.8-RS )
(     >> T0202 R0.8 G96 S250 F.250 M4 |     | WZ-2-L R0.8-RS )
(N04  >> T0404 R0.4 G96 S280 F.080 M4 |00:20| W24-W5-R0.4-L-A-STECHEN )
(N10  >> T1010 R0.4 G96 S50  F.070 M4 |00:14| WZ9-D21-IN-VOR-KONTUR-R0.4 )
(N05  >> T0505 R0.4 G96 S50  F.100 M4 |00:36| WZ67-D20-MINU S20 GRAD-R0.4-SR )
(     >> T0505 R0.4 G96 S50  F.050 M4 |     | WZ67-D20-MINU S20 GRAD-R0.4-SR )
(N06  >> T0606 R0.4 G96 S200 F.120 M4 |00:32| WZ-102_R0.4-SL )
(N08  >> T0808 R0.8 G96 S250 F.200 M4 |00:08| WZ-3-L-A-SCHLICHTEN-R0.8 )
(N09  >> T0909 R0.4 G96 S130 F.050 M4 |00:18| WZ67-D19-MINUS20-GRAD-R0.4 )
(N11  >> T1111 R0.4 G96 S130 F.100 M4 |00:04| WZ-19-80-D20-L-R0.4 )
(N092 >> T0909 R0.4 G96 S130 F.050 M4 |     | WZ67-D19-MINUS20-GRAD-R0.4 )
(N15  >> T1515 R0.0 G97 S3183F510. M3 |00:49| 16 SCHAFTFRÄSER )

 
G0 X600 Z600
G50 S2500
 
N03
 
 ( Werkzeug -- WZ-16P-D20-IN-VOR-R0.8 )
 ( Halter   -- S10M-SCLCL 06 )
 ( Platte   -- CCMT 09 T3 08-MM )
 
 ( Innen Schruppen Kontur Anschluss )
 
G0 X600 Z600
T0303
VLMON[VETLN]=3
G97 S796 M63 M04

...

...

 

CycleTime.zip

Nice work taking he original and making the changes needs for your process.

[Zaffin_D]

It’s cool to see this stuff used in the wild; Good work!

[xxedraxx]

CycleTime [2021] .zip