Multi axis Curve

[javi11]

Hello,

I am programming a Haas VR11 and the maximum tilt angle is 32 degrees. When using multi axis curve I would like to set a maximum and minimum tilt angle of 31 degrees to keep it within range, is there any way i can set that range so i would not get any alarms or errors? Thank you.

[huskermcdoogle]

Can you post a sample file?

[crazy^millman]

There are limits in that toolpath. Have you tried setting them here? How are you controlling the Tool Axis? Surface is going to be the most random of methods pulled from the model you are cutting. Lines provide the most control and allow you to dance the jitterbug if you want to with the machine. Like Husker asked you got a sample file so we can be on the same page as you?

 

 

[javi11]

yes, i have tried setting them there but it does not work. since the part is set on the machine table and the head is the one that tilts i was guessing there is a way to set an A and B axis maximum and minimum tilt parameter where you can set the limits. I did have the curve option set to surface and i have seen that lines provide the most control

[jlw™]

If the post respects the machine definition there is.  If not, there still is but entirely in the post.

Who's post are you using?

 

[#Rekd™]

15 hours ago, crazy^millman said:

got a sample file so we can be on the same page as you?

Easiest way to get help is to post a file!