Little Work off macro I made for our MXs

[Leon82]

CAMPLETE runs from the face of the table. So this makes it easy to set when we setup with the raptor dovetail and most programs.

Usually we will touch the face of the fixture with the probe if z also if needed

I know it can be transformed in CAMPLETE if you program from the top but it makes it easier this way

 

%

<80>(WORK OFFSET MACRO)

(P=OFFSET NUMBER)

#1=PRM[19700]

#2=PRM[19701]

#3=PRM[19702]

#4=PRM[19705]

G90G10L2P1X[#1/25.4]Y[#2/25.4]Z[[#3+#4]/25.4]

M30

%

[cncappsjames]

This is my usual setup;