Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Five-axis path weird tool creation problem.


Leon82
 Share

Recommended Posts

So I'm defining my tool for a 5-axis flow line path.

then it switches another tool from a different operation to the same type of tool I just definedand geometry and completely overwrites it.

 

this also happened to my coworker except it overwrote like four of his operations with the wrong tool after they were already made

Link to comment
Share on other sites

are you sure you don't have two programmers working the same file over a network?

I had that happen a while back.

Two different guys start whining about bugs, disappearing toolpaths, overwritten toolpaths, missing geometry etc etc

Turns out they were both working on the same file at the same time.

It should not be possible, but it is.

I was told in X5 days a fix was 2 or 3 releases away.. but no fix yet.

 

Link to comment
Share on other sites
3 hours ago, gcode said:

are you sure you don't have two programmers working the same file over a network?

I had that happen a while back.

Two different guys start whining about bugs, disappearing toolpaths, overwritten toolpaths, missing geometry etc etc

Turns out they were both working on the same file at the same time.

It should not be possible, but it is.

I was told in X5 days a fix was 2 or 3 releases away.. but no fix yet.

 

I think Zaffin_D made some kind of a patch for the issue, I will look for the post.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...