Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Manual Entry output need at header and footer of program


Recommended Posts

hello, 

Is it possible to manipulate Manual entry output as per requirements. Kindly refer below example.

%
O0000
(TOOL - 12 OFFSET - 12)
(OD RIGHT 55 DEG  INSERT - DNMG 15 06 08)
G0 T1212
G18
G97 S1724 M03
G0 G54 X54.469 Z4.5 M8
M101   header position required 
G50 S3600
G96 S295
G99 G1 Z2.5 F.2
Z-65.577
X57.767
X60.595 Z-64.162
G0 Z4.5
X47.873
X50.701 Z-64.162
G0 X58.767
 0.  (  M101 footer position required  but getting 0 value ) 
G28 U0. V0. W0. M05
T1200
M30
%

manual entry.png

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...