Trimming issues...

[Guest]

1 minute ago, Dan_AKA_ROY said:

Just installed 2021 last week. Received the Update 1 this morning.

Hadn't noticed any trimming or fillet issues. I did some tests just now and everything seems fine.

(A different subject) But after Update 1 finished, I opened a grill file I'm machining (now). Toolpaths were red X'd that were fine before. I couldn't regen them! Thought locked? Ghosted? Nope. I got worried...Closed the program....re-opened file and toolpaths all good. Everything now acts normally. (That was weird)

Did you migrate the file?

We noticed when we toolpath nest toolpaths from earlier versions, some files do not work until they are resaved in 2021

[Dan_AKA_ROY]

No. Everything was whack. Certain toolpaths were red X'd and could not be regened. Closed program. Opened program. Re-opened file and everything looked and acted normal. Toolpaths not red x'd.

[Dan_AKA_ROY]

On 8/13/2020 at 11:22 AM, Dan_AKA_ROY said:

Hadn't noticed any trimming or fillet issues. I did some tests just now and everything seems fine.

Know what you mean now. Doing a lot of trimming this week (new grill mold for our hood scoop). Super touchy. Driving me a little nuts (not a huge deal but very annoying). It's the new drag selection added that causing the issues for me. Doing everything right, yet it still acts up. It will select the perimeter spline sometimes (when trimming interior patterns).

Agree with Jeff, I liked it the old way (2020 and before!)

[tony1001]

I get the same things as some of you guys when trying to create fillets, but one more thing that it does to me is that it turns on auto highlight for solids until I close out of Mastercam and then reopen it. It does it without fail every time I create a fillet.