MC 2020 Verify backplot issue

[Thee Rickster ™]

Was using 2018

Now using 2020 now and found something that is 100% repeatable.

If I am generating a stock model of my all finished toolpaths, I cannot use verify or backplot until

it is finished or force close, restart, start verify and or backplot then start regenerating the stock model.

Is anyone else noticing this new behavior? (I cannot go into multi-threading, it will not stop the stockmodel)

 

Thanks in advance

Rick

[JParis]

I think what you're seeing is the inability because something you want to backplot is affected by the stock model generation...

Just like a crunching toolpath, you can open it it, you can not edit it until it's done

If I am understanding, what you are seeing is by design

[Thee Rickster ™]

Nailed it John. Thanks!

 

Anything after the stock model works

[crazy^millman]

Yes that took some time to adjust to. I thought before that change we could backplot a toolpath even if the stock model was regenerating.