Fanuc 10m and DNC

[tazbierek 7]

HELLO everyone.

I need help to configure my dnc and parameters on my machine . I dont have tape mode on my machine so its hard.

I can send it to my machine and from machine to dnc but I have no much space for programs and o need to run it automatically from my DNC with USB port. 

 

Can anyone tell my how ?

I'm using rs232 port which looks like that one . And here u can see my dnc and my control panel

[tazbierek 7]

here is rsst of photos . As I said there is connection cause I can semd it to my machine but for memory I have to click punch on my machine but I need to run it from dnc because of low memory 

[Leon82 398]

We use moxa boxes on our 6m control. Dnc works fine.

 

You have to have it on tape, but there may be a parameter you need to change

[tazbierek 7]

There is no tape mode thats the problem I know but I don't know which parameters should I change . I hope there is someone to help me

[Leon82 398]

There is definitely a position on the dial maybe it's called remote?

Okay I just looked at the picture so maybe not

[tazbierek 7]

I can't see. I spend on it many hours and nope. Mby its just me can't see that . We have more machines and they have tape mode and its easy but no that one but I need it. 

I can't see remote