Tool Breakage Check

[OVodov]

Hello all,

Is it possible to check tools for breakage in Mazak i700 Matrix 2?

Thanks to all & have a great day!
Oleg V.

[JParis]

Does it have a tool setter? or laser?

 

[OVodov]

It does, mechanical.

[JParis]

Well, try this...I got this years ago from a Mazak AE, we use it on all of out HMC's

The M33, M198, M34 codes might need to be changed based on the M codes your machine will use for extending the arm, measuring and retract the arm..

O99999999(TOOL BREAKAGE MACRO)
#521=-31.11023 (INDICATE CENTER OF PISTON AND ENTER VALUE HERE)
(X AXIS TOOL MEASUREMENT POSITION)
#522=-31.46456 (INDICATE CENTER OF PISTON AND ENTER VALUE HERE)
(Y AXIS TOOL MEASUREMENT POSITION)

(TOOL BREAKAGE DETECTION)
N1 IF[#51999EQ0.]GOTO10
#523=#4001
#524=#4003
#525=#4005
#526=#4006
#100=#[60000+#51999]
#102=.02  (LENGTH CHANGE AMOUNT)
G00G28G49G91G94Z0.
G53G90X#521Y#522M19M33
M198
M34
N2
#101=#[60000+#51999]
#[60000+#51999]=#100
G#523G#524G#525G#526
IF[[#100-#101]GT#102] GOTO111
IF[[#101-#100]GT#102] GOTO112
M99
N111 G00G91G28Z.0
     #[63000+#51999]=1.
GOTO999
 
N10 #3000=21(-NO-TOOL-IN-SPINDLE)
M99
 
N999
G0G28G49G59G91Z.0
G28X.0Y.0
G90
#3000=22(-TOOL-IS-BROKEN)
(THIS IS WHERE YOU WILL CONFIGURE)
M30

N112 #3006=1(TOOL-IS-LONGER-THAN-IT-WAS)
GOTO1
M99

I call it at the end of the tool

M9
M5
G0G28G91Z0.
G90G10L10P#51999R0
G90G10L12P#51999R0
M01
M98P99999999
M01
()

 

[OVodov]

Thank you very much.

I'll try it today.