I'm looking for a Haas Post processor or definition?

[HairyWBush]

Are they the same thing? I need it for my new job and I'll be programming a Haas.

[crazy^millman]

The Tech Exchange has them for free. 

Link to a Free HAAS Post

You up to tweaking a post then there are the MPMASTER posts that are Generic, but have a lot of HAAS functionality built into them.

MPMASTER Link

Asking for Post is not allowed since we get some many illegal users of the Software, but since I am the crazy person I will point you in the direction to help. 

[HairyWBush]

Thank you! Are post and machine definitions the same thing?

[#Rekd™]

42 minutes ago, HairyWBush said:

Are post and machine definitions the same thing?

Nope!

 

11 hours ago, HairyWBush said:

I need it for my new job and I'll be programming a Haas.

They asked you to provide your own post processor and machine definition?

[JParis]

3 files

control definition

machine definition

Post Processor

 

All 3 are required in any version of Mastercam from X on up

[Rstewart]

The basic machine Def and post is included with MC that'll be fine for programming a 3 axis Haas

[HairyWBush]

So why are the machine definition and post different because once you select the machine i would think that should give you the appropriate g-code.

what does the default mill lack compared to the 3 axis haas?

[nickbe10]

On 9/25/2020 at 8:08 PM, HairyWBush said:

So why are the machine definition and post different because once you select the machine i would think that should give you the appropriate g-code.

machines can be installed and set up many ways, so this allows you to reflect this in your machine control.

We have 2 Mori Seiki 4 axis mills.

One is set up with tool management, the other is not. They both use the same machine def but different posts to give the correct output.

[sang]

On 6/10/2020 at 02:35, nickbe10 said:

113 / 5000

 

Kết quả dịch

i am in need of post processor of umc750 haas to simulate mastercam! who can help me. Thank you everyone!

 

[#Rekd™]

7 hours ago, sang said:

i am in need of post processor of umc750 haas to simulate mastercam! who can help me. Thank you

Asking for a Post processor is not allowed. This is something you PURCHASE or make yourself.

Contact your reseller.

[sang]

On 24/1/2021 at 22:28, #Rekd™ said:

Yêu cầu người xử lý bài viết không được phép. Đây là thứ bạn MUA hoặc tự làm.

Liên hệ với người bán lại của bạn.

in mastercam can i use any post processor that is almost identical to haas not

[#Rekd™]

You can use any post processor you want as long as it produces suitable code for your machine.

Contacting you reseller is the first step.