okuma osp e100 mill atc problem

[mig]

  Hello Okuma gurus 

  What parameters i have to change to be able to  do tool change by pulls handle ?

  Thank you in Advance 

[jeff]

From my notes that I've had for years:

USE AT YOUR OWN RISK

 

MC User Parameter no. 13 System Check Mode

Set #1 sys check mode to 72

Use handle to move arm

then switch screen to "machine axis parameter"

move arm until the "TS" value reaches 0  (it has a 0-360 range)

Reset from 72 to 0

Re-check tool # values.

Display change #25 & #47

[mig]

  Thank you jeff.