I find a bug for Generic Fanuc 5X Mill.pst

[opcode]

Hello,

           I  modify top_map to 1  for Generic Fanuc 5X Mill.pst 

when I  use mulitaxis toolpath , I find that  mi10$ can't change angle + or -  of misc when I  post

Have you get the problem? How to solve it ? Thanks!

 

      

[#Rekd™]

Have you tried contacting your reseller?

[opcode]

44 minutes ago, #Rekd™ said:

Have you tried contacting your reseller?

Yes, They can't solve the Problem either,so I post for help.

[crazy^millman]

Sorry then sounds like you will need to get a 3rd Party Post. Send an email to [email protected] and see what they say.

[Colin Gilchrist]

On 11/16/2020 at 10:07 AM, opcode said:

Hello,

           I  modify top_map to 1  for Generic Fanuc 5X Mill.pst 

when I  use mulitaxis toolpath , I find that  mi10$ can't change angle + or -  of misc when I  post

Have you get the problem? How to solve it ? Thanks!

 

      

What Toolpath inside Mastercam are you using??? <<- That Makes a difference.

MI10$ is for "Toolplane-Based Paths".

MI9$ is for "Vector-Based Paths".

Perhaps you are programming a 5-Axis Path, and using the wrong integer for control?