Posting error "The 'startbin' header was found but not 'endbin'"

[Mikael_NAUTOR]

Have installed mastercam on my new computer.

everything is fine byt posting.

I got error in the logfile that says: The 'startbin' header was found but not 'endbin'

I have tried to reinstall and nothing helps.

Are there somone who can help me with this issue?

 

16 Nov 2020 06:53:31 PM - Report created.
16 Nov 2020 06:53:31 PM - Initialize posting log file
16 Nov 2020 06:53:31 PM - Using MP run version 21.00 and post components version 21.00
16 Nov 2020 06:53:31 PM - Initiate opening the post processor file(s).
16 Nov 2020 06:53:31 PM - C:\Users\Public\Documents\shared Mcam2019\mill\posts\Xilog_Plus.PST
16 Nov 2020 06:53:31 PM - An encrypted post file is associated with the post file.
16 Nov 2020 06:53:31 PM - Post processor file name: C:\Users\Public\Documents\shared Mcam2019\mill\posts\Xilog_Plus.PSB
16 Nov 2020 06:53:31 PM - The post processor file has finished the read process.
16 Nov 2020 06:53:31 PM - Initialization of pre-defined post variables, strings, postblocks was successful.
16 Nov 2020 06:53:31 PM - The 'startbin' header was found but not 'endbin'
16 Nov 2020 06:53:31 PM - Search for defined post variables, strings, postblocks failed!
16 Nov 2020 06:53:31 PM - The application has been aborted!

[nickbe10]

You are trying to run an encrypted post processer without both files.

Encrypted posts require a .pst file AND a .psb file  

[Greg Williams]

Sounds like you are missing a file, create a zip2go and upload it if you want, someone here will know the answer