Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

CHOOK TRANSFER


AWL304
 Share

Recommended Posts

10 minutes ago, gcode said:

I believe this chook was written by a forum member and is not supported by CNC Software

Try searching the forum and see if the author has updated it to MC2020

 

yes, i found the original post, just didnt notice the second page....oops

i see hes been updating, im just behind

thanks

Link to comment
Share on other sites
On 12/2/2020 at 7:48 AM, AWL304 said:

Im going into MCAM2020 and trying to transfer things, ihave a chook i like to use, so i copied the .dll & .ft files to the chooks folder. When i try to run it i get this error.

how do i "rebuild" the files for 2020??

if thats my problem

thnaks

CHOOK.JPG

Unlike Nethooks Chooks are not Cross Version compatible, there is an m_version function that will not allow a chook to run unless it is the same version it was compiled for.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...