ModuleWorks help file

[Metallic]

Does someone have the most recent ModuleWorks help file available to share?

 

Can't seem to find it here.

Thanks

 

Cameron

[MWearne]

I haven't seen anything newer than 2019.4 yet. There should be a 2020.4, 2020.8 and I guess a 2020.12 too...I'm thinking the 2020.4/8 might be whats inside of 2022 Mastercam? so those may not be useful until its official release. If you are curious there is a Whats New here...

If you don't have a login or can't find a link in the sticky,  you can also download it here...
https://blog.caminstructor.com/module-works-help-in-mastercam

(right down at the bottom of that page. I'll also be adding the newer ones once I find them)

[shazam/TPP]

go to the actual Mastercam website and under learning / documentation you will find the latest multiaxis help files.

there also is a thread on this and you can find it   HERE

[Metallic]

Found it, thank you!

It should be noted that you need to go to the document properties in windows explorer and check the box that says "unblock" to open the doc properly