Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

GEOMETRY VALUE


Recommended Posts

Hello everyone,
    I would like to get the parameter numbers for the "A" and "B", I have tried A but failed to do so.   

 

PS: I often doing the WRONG CIRCLE MILL value.  I would like to make a warning statement if they are (A, B) not the same, then show alarm

Thanks for the help.

 

 

935381808_FINISHCIRCLEMILLINTERFACE.thumb.png.8c366d72682cc376d13be44e23593230.png

Link to comment
Share on other sites
1 hour ago, PcRobotic said:

Hello everyone,
    I would like to get the parameter numbers for the "A" and "B", I have tried A but failed to do so.   

 

PS: I often doing the WRONG CIRCLE MILL value.  I would like to make a warning statement if they are (A, B) not the same, then show alarm

Thanks for the help.

 

 

935381808_FINISHCIRCLEMILLINTERFACE.thumb.png.8c366d72682cc376d13be44e23593230.png

If value B is grayed out the value will always be 0.0.

Link to comment
Share on other sites
On 12/14/2020 at 11:54 AM, Thee Byte™ said:

Here is a sample chook that checks the operations arc diameter(s) against the circle mill operations override if there is one.

It will complain in a messagebox and the event logger if one is found.

ForceCircleMillOverrideDia.zip

Mastercam 2021

 

Thank you for the offer, I am having issue is I cannot copy or install any DLL files because I don't have ADMIN rights.  I guess I have to make the post work like the way it would allow me to.

Link to comment
Share on other sites
Just now, PcRobotic said:

 

Thank you for the offer, I am having issue is I cannot copy or install any DLL files because I don't have ADMIN rights.  I guess I have to make the post work like the way it would allow me to.

In your other post it looked like you found the values, nice work!

Link to comment
Share on other sites
  • 2 weeks later...
On 12/17/2020 at 9:15 AM, Thee Byte™ said:

In your other post it looked like you found the values, nice work!

 

I have made it work, after a week (I am a rooky in post editing)...

 

===============

%
O5828(AMAT-0041-95828 REV05 - OP30.NC)
(*)
(TOTAL TOOLS FOR OP70 - RTP = 2 TOOLS)
(T23= .5, 1/2 EM, RG, CBD * Z-1.5)
(T130= .25, 1/4 Keyseater, CBD * Z-.6128)
(*)
(WORK OFFSET LIST)
(G54 B0.)
(XY0 = CENTER)
(Z0 = TOP, Z-.015)
(*)
(CYCLE TIME = 04M 5.08S)
(*)
(*)
N23(ROUGH OUT 1X 1.125 +/-.0005 C'BORE, CUT#96)
G0 G17 G40 G49 G80 G90(30.94S)
G91 G28 Z0 M19(1.125DIA. ,.0125ROUGH STPOVR) ==============> 1.125DIA.
G28 Y0.(XYZ STK= .015)
G28 X0.(FINISHED CIRCLE)
G0 G90 B0.
M8
T23(.5000, 1/2 EM, RG, CBD,)
M6
G90 G54 X.8715 Y-1.9097 S7000 M3
Z3. T130 (DOC= Z-.485)
/G4 P2.5
Z.0625
G1 Z.0313 F50.
G3 X1.3215 Y-1.9118 Z-.0058 I.225 J-.0011
X.8715 Y-1.9097 Z-.0428 I-.225 J.0011
(CUTTING...)
X1.0336 Y-1.6272 R.1487
G1 X1.0965 Y-1.9107
G0 Z.125
Z3.
M9
G91 G28 Z0.
G28 Y0. M5
G28 X0.
M1
(*)
N130(ROUGH OUT .665 +/-.003 MID KEY, CUT#97)
G0 G17 G40 G49 G80 G90(01M 14.36S)
G91 G28 Z0 M19
G28 Y0.(XY= .005, Z STK= .0097)
(3X, RMULTI-PASSES, .005 EACH)
G28 X0.
G0 G90 B0.
T130(.2500, 1/4 KeyseaterCBD,)
M6
G90 G54 X1.0965 Y-1.9107 S4500 M3
Z3. M8 T23 (DOC= Z-.6128)
/G4 P2.5(ADOC =.0318DP)
Z.0625
G1 Z-.6128 F5.
(CUTTING...)
X1.0965 Y-1.9107
G0 Z3.
M9
G91 G28 Z0.
G28 Y0. M5
G28 X0.
M1
(*)
N2302(FINISH 1X 1.125 +/-.0005 C'BORE, CUT#105)
G0 G17 G40 G49 G80 G90(01M 24.58S)
G91 G28 Z0 M19(1.125DIA ==============> 1.125DIA
(1X SEMI-FINISH, .005)
(1X FINISH, .0025)
(1X SPRING PASS)
G28 Y0.
G28 X0.(FINISHED CIRCLE)
G0 G90 B0.
M8
T23(.5000, 1/2 EM, RG, CBD,)
M6
G90 G54 X1.0965 Y-1.9107 S7000 M3
Z3.(DOC= Z-.5)
/G4 P2.5
Z.0625
G1 Z-.5 F10.
G41 X1.2676 Y-1.3887
G3 X1.0965 Y-1.3507 R.405
(CUTTING...)
Y-1.3482 R.5625
X.9248 Y-1.3863 R.4063
G1 G40 X1.0965 Y-1.9107
G0 Z.125
Z3.
(*)
(PROGRAM JUMPS HERE)
(*)
N2303(FINISH 1X .625 +/-.0005 C'BORE, CUT#106)

(.625 DIA.)   ==============> .625 DIA.
T23(.5000, 1/2 EM, RG, CBD,)
M6
G0 G90 G54 X1.0965 Y-1.9107 S7000 M3
Z3.(DOC= Z-1.5)
Z.0625
G1 Z-1.5 F10.
G41 X1.2148 Y-1.627
G3 X1.0965 Y-1.6007 R.28
Y-2.2207 R.31
(CUTTING...)
G1 G40 X1.0965 Y-1.9107
G0 Z.125
Z3.
M9
G91 G28 Z0.
G28 Y0. M5
G28 X0.
M30(CHARACTERS COUNT = 4,122 - 4.03KB)
%

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...