Locked Tool Path Bar

[cpcem43]

MasterCam 2018

Have created a drawing with multiple toolpath operations and somehow I have made the Tool Path menu bar and tool path entries unreachable. When I hover in the Tool Path menu bar the icons light up but clicking on any of the icons does nothing.

Everything else seems to be working that I have tried.

      Drafting

      Simulation

Read in another post that the Parameters in an operation could be modified if the operation was locked but that does not work as well.

Added a new contour operation and it did add to the operation but now when I run simulation it only displays that new operation.

Have read multiple posts regarding but can not find anything addressing this specific problem. Only that I should be able to toggle locked operations by clicking on the padlock icon.

Hopefully someone here can help.

TIA

 

Adapter Plate.mcam

[Leon82]

Advanced configuration from the start menu mastercam folder.

 

Then click on reset navbar or something like that.

 

You can try holding shift as you open mastercam also. I know it works for Camplete like that

[cpcem43]

Have no idea where the start menu mastercam folder is. However a computer reboot seems to have cleared the problem.

Windows 10. Appreciate if you could help me find that folder.

Thanks