Activereports stock image issue

[ToolanddieGuy]

Hey everyone. I recently started with a new company, and one of my first tasks was to develop a setup sheet. I've done this in the past, but I hit a snag that I just can't seem to get around. I'm using Activereports, and for the image of my stock, I'm getting a very small picture of the wireframe with the WCS. I'd like the stock image to zoom in and fill the box. Can anyone help?

[crazy^millman]

Need to reach out to Mick at CNC Software.

This is an Industrial topic not educational.

Welcome to the forum.

[#Rekd™]

Can you attach the setup sheet template you are using?

 

[ToolanddieGuy]

I'm using mill2 as a template. Thanks!

edit: but I snagged the "MillSZ" file from the "mill" template and modified that

[#Rekd™]

The MILSZ template has the "stock photo" size set as 6.375, 3.813

This video shows how to modify the active reports (although it is an older version of Mastercam the process is the same).

 

 

[ToolanddieGuy]

Thanks for the reply. Thats actually the video tutorial I used to create my initial setup sheet. There's no mention in there about how to change the image size. I've reached out to Mastercam technical support, and waiting to hear back.

[Mick George]

On 1/15/2021 at 9:01 AM, ToolanddieGuy said:

Thanks for the reply. Thats actually the video tutorial I used to create my initial setup sheet. There's no mention in there about how to change the image size. I've reached out to Mastercam technical support, and waiting to hear back.

Did you ever get an answer to this?

If not, if you open the image in an image viewer is it actually that small? 

The image control used in the active reports has a size mode property, by default it is set to Zoom, you could try the Stretch or Clip setting to see if that gives you the view you are looking for.