Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

FRUSTRATED!!! help

tyler@goscpm.com
 Share

Recommended Posts

cncappsjames Experienced

cncappsjames

Posted
Posted

Those are splines... you're rarely ever going to have success extruding that.

 

If you absolutely have to have a shaded image, go to Surfaces, pick Draft and chain your shape and the length is how tall you want it. Do that. Transform copy the chain up the thickness you want, then create flat boundary surfaces on the top and bottom. Now, you should be able to go to solids and create a solid body from surfaces and select the walls, floor and ceiling and it'll work then.

Post-IT Housing III - Draft - Solids From Surfaces.zip

  • Like 1
Link to comment
Share on other sites
tyler@goscpm.com Newbie

[email protected]

Posted
  • Author
Posted
18 hours ago, cncappsjames said:

Those are splines... you're rarely ever going to have success extruding that.

 

If you absolutely have to have a shaded image, go to Surfaces, pick Draft and chain your shape and the length is how tall you want it. Do that. Transform copy the chain up the thickness you want, then create flat boundary surfaces on the top and bottom. Now, you should be able to go to solids and create a solid body from surfaces and select the walls, floor and ceiling and it'll work then.

Post-IT Housing III - Draft - Solids From Surfaces.zip

Thank-you!

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Useful Links

Contact Info

Subscribe to eMastercam News

 

Legal

Privacy Policy

Store Terms & Conditions

Forum Guidelines

Follow us

×
×
  • Create New...