Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Level Report


Müřlıń®
 Share

Recommended Posts

Hello Guys.
 

I have a file error that happens sometime when using the "save as".

 

I have a level that will not go away no matter what you do and it gives an error message about the active level not being visible

even after saving file with that level visible.

Report has symbols that I think are associated with stack overflow...not sure...

 

any ideas?  Below is the file that will error.

2021-02-03_13-49-37.jpg

1.mcam

Link to comment
Share on other sites
3 minutes ago, Müřlıń® said:

Hello Guys.
 

I have a file error that happens sometime when using the "save as".

 

I have a level that will not go away no matter what you do and it gives an error message about the active level not being visible

even after saving file with that level visible.

Report has symbols that I think are associated with stack overflow...not sure...

 

any ideas?

2021-02-03_13-49-37.jpg

What version of Mastercam are you using Murlin?

Is it possible to share a stripped down version of the file?

I can't say that I've seen this before

Link to comment
Share on other sites

I'm not seeing any error Murlin, I added a new level and cleared the old one.

 I got the error the second time I opened it. However I was able to clear the level after that.

I'm thinking there could be corruption in your configuration files or the Mastercam Install.

Do you have a backup for the shared Mastercam and My Mastercam folder?

I would replace those, and if that doesn't fix it re-install.

 

Error Msg.png

Level Cleared.png

Link to comment
Share on other sites
15 minutes ago, Müřlıń® said:

2021...I added the file...

 

What update version of 2021?

 I'm running update 2.1. 

I would suggest sending it to QC, in case they know something else I don't.

 

Link to comment
Share on other sites
  • 2 weeks later...
  • 5 months later...

Thank you Mick...

 

I finally figured out how to purge this bug...so far it is working.

 

I always open a Mastercam file by double clicking on the file.

 

Today this error got so bad I could not use a file because the popup window in Mastercam would NOT echo it to the screen...probably because I am using 3 monitors.

The window would only appear after I exited the file...and while the popup was active the file was useless.

 

So I opened a fresh Mastercam file by using icon on task bar.

Then used the open command to pull in my file.

The popup complaining about the active level not being visible came up and I clicked ok.

 

Then I renamed the offensive level, saved the file, and closed down Mastercam.

 

Then I opened the customers folder and double clicked the file as  I normally do and voila....no popup...

 

Note I had already done this several times to no avail.  but I hadn't accessed the file above secquence.

 

 

2021-08-10_9-28-56.png

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...