Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Help with Thermwood Machine Definition Please


Müřlıń®
 Share

Recommended Posts

Hello Guys.   never messed with Thermwood....Strange animal...

Need help setting up Machine def.  the machine will not accept C- output so I need to get the machine set up to limit head rewinds.

 

Here is is a pic of the control limits.  and also I have pics of limits now in the Mastercam machine definition.

 

any help would be appreciated.

 

2021-02-04_10-32-13.jpg

2021-02-04_10-33-10.jpg

2021-02-04_10-32-59.jpg

Link to comment
Share on other sites

It's possible it was setup that way, normally it should be pointing straight down, it looks to be at -135.

If that were the origin your range would probably be 0 - 270

Usually straight down would be 0 and you could move (135) - (-135)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

×   Your link has been automatically embedded.   Display as a link instead

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×