Help with Thermwood Machine Definition Please

[Müřlıń®]

Hello Guys.   never messed with Thermwood....Strange animal...

Need help setting up Machine def.  the machine will not accept C- output so I need to get the machine set up to limit head rewinds.

 

Here is is a pic of the control limits.  and also I have pics of limits now in the Mastercam machine definition.

 

any help would be appreciated.

 

[Guest]

Murlin, that is how ours are setup for Thermwood 5Ax

[Müřlıń®]

TUVM!  is the head positioned like this for B0?

[Müřlıń®]

[Guest]

It's possible it was setup that way, normally it should be pointing straight down, it looks to be at -135.

If that were the origin your range would probably be 0 - 270

Usually straight down would be 0 and you could move (135) - (-135)

[Müřlıń®]

Yes that is B0 on their machine.

[Guest]

5 minutes ago, Müřlıń® said:

Yes that is B0 on their machine.

Ya, I had to rotate my head around there for a second. Kind of a strange choice, but ok.

[Müřlıń®]

So the B would be clockwise 0-270 like this?

[Guest]

4 minutes ago, Müřlıń® said:

So the B would be clockwise 0-270 like this?

Yes, it should be okay like that.