PM1000 Powermatic Table Saw

[Albefrax 0]

I would like to hear people’s think about these PM1000 powermatic table saws https://www.auditpowertools.com/powermatic-table-saw-review/. I’m thinking of getting my first powermatic table saw, but looking at the $2500 range…
Thank you in advance for your suggestions.

[TOM S 8]

1-3/4 HP seems a little under powered.  10" Cabinet saws more often start around 3HP.  Have you looked at King, or Grizzly?

https://www.kingcanada.com/en/products/woodworking/table-saws/?per_page=20&sort_by=1&displayMode=grid

https://www.grizzly.com/table-saws

I think you'll get more bang for the buck with these.  

[CNC_Newbie 23]

Get a Rockwell 12/14. I used to have the 10” Delta and its nice. Powermatic is nice too. For the money your going to spend get used 12/14 and forget about the rest.  I also suggest a Biesmeyer fence, and to build a criss cut jig/slider. Also dont forget a riving knife if you rip hardwood.

Here is a link to a decent looking 12/14 and I bet you can have it trucked for less than the $2,500. 

https://www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwjL9ODyhvfvAhU1Pq0GHeLTCagYABAFGgJwdg&ae=2&ohost=www.google.com&cid=CAESQOD2ltrPAIL01NcGmLpZmJIbPrZW0zGM2bQoeVFauLg1mad-6OCGQuBvVMmZGcReP3RxslJixHa5iVlq13yHGJ8&sig=AOD64_2Cny_UIKb-6XUtnjdgaCf--f7ZUQ&ctype=5&q=&ved=2ahUKEwiI1tTyhvfvAhXNGc0KHcXIDAcQwg96BAgCEA8&dct=1&adurl=