Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Active tool list help


sbowling
 Share

Recommended Posts

I am stuck on trying to get the Insert Manufacturer Tool Code to show up on my tool list for a lathe tool.  I get the Holder Manufacturer Tool Code. In the attached picture, "EPICOR" is the holder tool code and the "EDP#" is supposed to be the insert tool code.  Any help would be appreciated.

Capture.JPG

Link to comment
Share on other sites
On 4/14/2021 at 8:31 PM, sbowling said:

I am stuck on trying to get the Insert Manufacturer Tool Code to show up on my tool list for a lathe tool.  I get the Holder Manufacturer Tool Code. In the attached picture, "EPICOR" is the holder tool code and the "EDP#" is supposed to be the insert tool code.  Any help would be appreciated.

Capture.JPG

You can search the XML file that is created by the tool list call, from the setup sheet dialog hold the CTRL button and left mouse click the green check button to have Mastercam generate a full XML file. The file will be located in your C:\Users\Public\Documents\Shared Mastercam 2022\common\reports\XML folder and you can search the tags. You can also take a look at the report help file and see the tag section.

Link to comment
Share on other sites
  • 2 weeks later...
On 4/19/2021 at 9:45 AM, Mick George said:

You can search the XML file that is created by the tool list call, from the setup sheet dialog hold the CTRL button and left mouse click the green check button to have Mastercam generate a full XML file. The file will be located in your C:\Users\Public\Documents\Shared Mastercam 2022\common\reports\XML folder and you can search the tags. You can also take a look at the report help file and see the tag section.

So I created the XML file and I go back and do another setup sheet, is still does not have my information.  What do I do with the XML file?

 

Link to comment
Share on other sites
On 4/28/2021 at 12:07 PM, sbowling said:

So I created the XML file and I go back and do another setup sheet, is still does not have my information.  What do I do with the XML file?

 

Scan the XML file for the information you need to verify it is there. Once you identify the data you can reference the tag.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...