Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Drafted walls


Recommended Posts

I’ve been working with a part for weeks now where the walls are drafted at .6 deg, and the walls are .1775 high.  The walls form teeth for a wave guide.  I’m using opti rough to take the cavity down to .020” remaining, then a swarf mill operation to finish the walls.  The problem is, the simulation shows the part to be perfect, but the physical part is over cut by .005.  I have a +\- .0005 tolerance and I can’t figure out how what’s wrong.  Anyone have any suggestions?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...