tool_op$

[SLuong]

Hello,
   I am looking for "tool_op$" for these below, would you guys tell me where to get it in the MASTERCAM PARAMETER pdf file?  I have them all but I cannot find them.  Perhaps they are another PDF file?

 

 

Thanks

=========================

shst00   : "CORE ROUGHING"      # String definition
shst01   : "AREA CLEARANCE"
shst02   : "WATERLINE"
shst03   : "CONSTANT STOVR"
shst04   : "HORIZONTAL"
shst05   : "RASTER"
shst06   : "PENCIL"
shst07   : "HYBRID"
shst08   : "NULL"
shst09   : "SPIRAL"
shst10   : "RADIAL"
shst11   : "REST ROUGH"
shst12   : "OPTI AREA"
shst13   : "OPTI CORE"
shst14   : "OPTI REST"
shst15   : "PROJECT"
shst16   : ""
shst17   : ""
shst18   : ""
shst19   : ""
sopnotehst : ""                    # Target string

# --------------------------------------------------------------------------
#Region Select High Speed Name
# --------------------------------------------------------------------------
sDynamicMill    :  "(DYNAMIC MILL)"
sAreaMill       :  "(AREA MILL)"
sContourMill    :  "(2D HIGHSPEED CONTOUR)"
sPeelMill       :  "(DYNAMIC PEEL MILL)"
sBlendMill      :  "(2D BLEND MILL)"
sDynamicArea    :  "DYNAMIC AREA"
sDynamicRest    :  "DYNAMIC REST"
sDynamicCore    :  "DYNAMIC CORE"
sDynamicContour :  "DYNAMIC CONTOUR"
shsname         :  ""
fstrsel sDynamicMill op_type_hsm shsname 9 -1
#EndRegion Select High Speed Name

 

# --------------------------------------------------------------------------
#Region Select Surface High Speed Name
# --------------------------------------------------------------------------
sOptiArea       :  "(OPTI-AREA)"
sOptiRough      :  "(OPTI-ROUGH)"
sWaterLine      :  "(WATER LINE)"
Scallop         :  "(SCALLOP)"
sHorizontal     :  "(HORIZONTAL)"
sRaster         :  "(RASTER)"
sPencil         :  "(PENCIL)"
sHybrib         :  "(HYBRID)"
sNoLongerUsed8  :  "(NO LONGER USE)"
sPrial          :  "(SPIRAL)"
sRadial         :  "(RADIAL)"
sNoLongerUsed11 :  "(NO LONGER USE)"
sNoLongerUsed12 :  "(NO LONGER USE)"
sNoLongerUsed13 :  "(NO LONGER USE)"
sNoLongerUsed14 :  "(NO LONGER USE)"
sProject        :  "(PROJECT)"
sEqualScallop   :  "(EQUAL SCALLOP)"
sBlend          :  "(BLEND)"
s3DHighSurfaceSpeedName:  ""
fstrsel sOptiArea op3DHighSurfaceSpeed s3DHighSurfaceSpeedName 18 -1
#EndRegion Select High Speed Name