Surface Finish Blend: bottom few passes not leading in/out

[Sigurd]

I have attached a file that I'm working on. In the third toolpath, the surface high speed blend, what is going on with the purple moves in the bottom of the slot? it appears also that the lead in/out distance appears to be changing as the depth of cut increases. How can I control this? 

 

9835_Gate-Insert-1.mcam

[crazy^millman]

1 hour ago, Sigurd said:

I have attached a file that I'm working on. In the third toolpath, the surface high speed blend, what is going on with the purple moves in the bottom of the slot? it appears also that the lead in/out distance appears to be changing as the depth of cut increases. How can I control this? 

 

9835_Gate-Insert-1.mcam

Change the keep tool down distance to something very small and every move will now have lead in/out like you want.

[Sigurd]

Thanks. I messed with that as well as Apply Transitions. Something else I missed was under Toolpath Control -> Curves. They weren't going the same direction.