Mastercam 2021 Verify Issue

[nperry]

Pardon me if this one is known - or maybe I've got something messed up.

Looking at the 4th axis operations on this part, I've got a rotary advanced toolpath and a couple of 5x flow toolpaths both using transform operations. This gets a little convoluted...if I stock model only the original operations it shows a finished tooth in the correct spot. If I stock model all of the operations it shows only one finished tooth, but one tooth rotated over from the original path. So something is weird with that. Then the verify is flat out messed up. The rotary advanced transform operation will verify out cherry, but the 5x flow won't verify even close to correct. 

I have, however, posted code and it looks good on an independent check.

File too large, using dropbox. Just curious if anyone wants to look and can help me see where I'm wrong if it's my fault.

https://www.dropbox.com/s/tgdochhcuq3n24y/RH HELICAL ELECTRODE.ZIP?dl=0

 

 

[crazy^millman]

59 minutes ago, nperry said:

Pardon me if this one is known - or maybe I've got something messed up.

Looking at the 4th axis operations on this part, I've got a rotary advanced toolpath and a couple of 5x flow toolpaths both using transform operations. This gets a little convoluted...if I stock model only the original operations it shows a finished tooth in the correct spot. If I stock model all of the operations it shows only one finished tooth, but one tooth rotated over from the original path. So something is weird with that. Then the verify is flat out messed up. The rotary advanced transform operation will verify out cherry, but the 5x flow won't verify even close to correct. 

I have, however, posted code and it looks good on an independent check.

File too large, using dropbox. Just curious if anyone wants to look and can help me see where I'm wrong if it's my fault.

https://www.dropbox.com/s/tgdochhcuq3n24y/RH HELICAL ELECTRODE.ZIP?dl=0

 

 

I didn't review the file, but I see the same issues from time to time. Do you have Machinesim for your machine built? If you have one tied to a Post even better. Use that and it will give you the best idea where you are out and not with Mastercam.

[nperry]

37 minutes ago, crazy^millman said:

I didn't review the file, but I see the same issues from time to time. Do you have Machinesim for your machine built? If you have one tied to a Post even better. Use that and it will give you the best idea where you are out and not with Mastercam.

We don't have a sim for our 4th axis machine, but if I use the generic it gives the same results as verify.