Curve 5th axis path pauses?

[[email protected]]

Hi everybody, I have a Dovetailed O-Ring Groove on a Compund Radius. I used Curve to program it. I was testing it on a Haas VF2 with a TR200Y. The path looked nice and smooth around the curves with all 5 axis moving BUT before and after it pauses and the 5th axis rotary brakes engages/disengages. I don't have any M codes to use the brake in my G code. I was thinking maybe it's a setting in the Haas but didn't see anything that caught my attention looking through them. Please help! 

5TH AXIS CURVE PRACTICE.ZIP

[JParis]

Add the unlock code at the beginning...even without the lock/unlock codes Haas controls will attempt do to it itself

[[email protected]]

I will try that out as soon machine is open. I really hope it's that easy. thanks in advanced.

[[email protected]]

It ran great! thanks again JParis...and uh feel free to answer my other question about 5 axis drilling....just kidding.