HELP!!! View/Plane Orientation in Mastercam 2021

[Kampfzentrum]

Running 2021 for the first time and I'm a bit confused due to the plane/view orientation. Normally, if I selected different planes to view from, the C/T plane would change with it. For instance, say I wanted to rotate a part. If I started in the top view, I could rotate that part looking from the top view. But - while still in the rotate command - I could change views (say left plane) and the plane of rotation would change with it. In the image I attached, I am in the left view, but my plane of rotation is still the top - as you can see my C/T planes are staying in the top plane. How can I change the plane to the view I'm in? That's just the way I've ever done it. 

[#Rekd™]

Setting in the Planes manager.

 

[Kampfzentrum]

1 minute ago, #Rekd™ said:

Setting in the Planes manager.

 

Much thanks! Never dealt with this before! Thanks for your time!